Skip to main content

i have installed all the latest updates for DCS WiFi. My system is powered by a Z4000, the TIU is powered by auxillary power. I use the MTH WiFi to communicate between my IPOD and IPhone. I don't have anything other than MTH engines on my layout. I have a mix of PS2 and PS3 engines (14 total)

problem:

1. The E function doesn't work. It is visible on each engine and I did unlock it.

2. Quillable Whistle will work after activated for a few times, then will not respond at all. (No sound in Quillable mode, but will sound in crossing mode) Some engines when Quillable mode is activated will only produce a whistle at a vastly reduced sound level, even though the volume level is at its highest level. These issues discribed are only resolved by turning the engine off and back on via the WiFi. The issues return as discribed. I deleted my WiFi app from my IPad and IPhone and reinstalled to no avail. The issues I discribed apply to every steam engine PS2 or PS3

i have purchased a copy Barry's latest DCS WiFi manual, it's on the way.

thanks in advance for your help!

Brad

Original Post

Replies sorted oldest to newest

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×