Skip to main content

Replies sorted oldest to newest

If using LED's in scenery other layout stuff, don't use track power, use a separate DC power supply. Actually makes things simpler. Refitting rolling stock to LED has savings and reliability as well, but as for me, I don't refit LED's in any original prewar stuff. It just ruins the original fabric and nostalgic look. BTW those miniature incandescents draw somewhere around .25 amps (YMMV), a typical LED will draw around .015-.020 amps (YMMV) 

To each his/her own I guess. Just yesterday I got my first switcher, a postwar 41, that was in truly excellent condition and very little track time as far as I can see. I put it on my test track and saw it had no light. I put in a 3mm warm white LED, taping it behind the lens, and it looks great. I also glued in, with easy to remove glue, an engineer in the cab.  The updates took all of 5 minutes and can be easily backed out.

It depends on how many LEDs are being used. Less than 50, not much.

We have hundreds of LEDs and prefer to use separate transformers from Evan Designs. Give Dave a call and he will get help you based on what your projected needs are.

Dave might be a bit more expensive than some but in all our years of using his LEDs, only one was bad and was quickly replaced. They are good people to deal with.

Hope that this helps.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×