Skip to main content

I have a Cab1 with several TMCC locomotives, both Lionel and KLine, with a simple layout. I'm getting the bug for some of the LEGACY Loco's. (Like I need Them) I have a 6-12866 135 watt Powerhouse and a 6-24130 Powermaster . Could I use these with the Legacy Cab1L or the Legacy  990. I usually run only one loco at a time and i have no planes to run accessories on Legacy. What do you think

Thanks

 

Original Post

Replies sorted oldest to newest

I believe that in order to have control of your powermaster from either of the Legacy control systems, you'd need to add the Legacy powermaster bridge. 

Or you could replace your existing powermaster with one of the new legacy powermasters.

 

Also, if you're only running command locos, you can leave the powermaster out of the equation altogether and just use a TMCC direct lock-on to connect your powerhouse to the layout to deliver full 18v at all times.

 

I agree with John in the suggestion of going with the full 990 system. 

Last edited by graz

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×