Skip to main content

I have a Vision Line 11154 Loco that starts up as soon as it sees track voltage. Switch to program, no response to new address I enter. Switch back to run. Try 01,99 as address to try to run it. It will not respond.

Tried reversing program and run in case it was wired backward and no luck.

It appears that it is not seeing the Legacy signal.

Any suggestions would be appreciated.

Thanks.

Brian

Original Post

Replies sorted oldest to newest

Brian Sheffield posted:

I have a Vision Line 11154 Loco that starts up as soon as it sees track voltage. Switch to program, no response to new address I enter. Switch back to run. Try 01,99 as address to try to run it. It will not respond.

Tried reversing program and run in case it was wired backward and no luck.

It appears that it is not seeing the Legacy signal.

Any suggestions would be appreciated.

Thanks.

Brian

Odd to startup when power up.  Is the antenna the place to start.  It sounds similar to losing power and regaining power and having it restart at high volume and smoke on.  No signal

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×