Skip to main content

Thank you, Ted. The comment is much appreciated. Any (likely undeserved) comparison to George’s work makes my day. I don’t want to hijack this great thread (since except for one, these are kits, not scratch or kitbashed) but, in answer to your request about more of my modeling based on George’s inspiration, here are a few favorites. The garage is Foscale, the barn is Laser-Art (I literally set it on fire to get the effect), I think the machine shop is Sierrawest, the scrap yard is part of scratch built scene, the water scene structure is Foscale, the skiff is ModelTechStudios.

Attachments

Images (6)
  • mceclip0
  • mceclip1
  • mceclip2
  • mceclip3
  • mceclip4
  • mceclip5
@Bob posted:

The old Grandt Line of windows, doors, etc. was bought by San Juan Models and is now San Juan Details.  Here is their door page:

https://sanjuandetails.com/arc...oors/building-doors/

Tichy Train Group also sells O-scale windows, doors, etc.  Here's their door page:

https://www.tichytraingroup.co...o_doors/Default.aspx

 

 

Thanks, Bob. Grandt Line and Tichy  are terrific, especially for older structures, but I am thinking of a site that had more contemporary doors. Maybe I just imagined it and am losing my marbles?

Last edited by Will

What a collection of great buildings and great talent! It's why it's so fun to continue to post in the OGRR Forum. Here's the scratch-built structures on my railroad. Most are in the Victorian end of the spectrum. 

1. Woodbourne Gallery; From my drawings, laser cut and 3D Printed parts, plus lots of other stuff. Based closely on an extant building, the Bronx Documentary Center in Bronx, NYC. Reduced height by one floor and length by about 15 scale feet so it would fit my village.

WG in Place 4

2. Nighthawks Cafe: Basic building from plans in 1957 Model Railroader Magazine, and then modified to contain Edward Hopper's "Nighthawks" masterpiece in the interior. All scratch-built with Plastruct brick paper. Turret turned on lathe. 

45 NH Complete 2

3. I.W. Berheim Bourbon Distillery: Laser cut from my drawings, plus lots of scratch-building. Based on a single photograph of this Victorian-age factory that resides on the wall of the waiting room of the modern Bernheim facility in Louisville, KY owned by Heaven Hill Brands. The real building was built in 1870 and razed during Prohibition.

Bernheim Final 3

4. Woodbourne Substation: scratch-built multi-media project including styrene, soldered brass, turned aluminum plus auto-body fasteners (as insulator sheds). Only kit was the Brennan chain link fence. Transformer is freelanced based on MTH transformer load (didn't use MTH, scratch-build new box). Remainder was from ABB high voltage equipment plans.

Substation in Site 01

5. Woodbourne Station: HO plans appeared in Kalmbach Buildings and Structures book. Constructed from my drawings entirely from styrene. Prototypes still exist on New York, Ontario & Western RR, although not used as train stations any longer.

Levin VIc Station 2

6. Sinclair Refinery: Plastruct Petro-chemical plant kit with added scratch-built (although the entire kit is actually scratch building) Marley Cooling Tower, Flare Tower with knock out drum, and Ops building. Entire site had to be redesigned from Plastruct layout to fit side. Load out stations were detailed up too.

Refinery Reverse View 1

7. Pennsylvania & Pacific RR Engine House: Freelance design drawn by me with laser cut walls, 3D printed accessories and multi-media overhead gantry crane. Building is 3 track spaced to Ross #4 ladder switches and is 40" L X 15" W X 15"H.

EH Beauty Shot

8. P&P RR Machine Shop: Attached to the engine house is a machine shop with a passel of 3D 1:48 machine tools. Some are downloaded drawings from SketchUp Warehouse, others are hand drawn by me (Niles Wheel Lathe, Sterling Radial Drill and Bullard Turret Lathe), but all required substantial editing to make printable.

EH Machine Shop Int 2 Canon

Attachments

Images (8)
  • WG in Place 4
  • 45 NH  Complete 2
  • Bernheim Final 3
  • Levin VIc Station 2
  • Refinery Reverse View 1
  • EH Beauty Shot
  • EH Machine Shop Int 2 Canon
  • Substation in Site 01

Hard to follow Trainman with anything!!  His stuff is over the top, 3D printed, greatness.

This was my first serious build, over 30 years ago, for a huge attic layout.  It now resides on my current table layout.

20200716_103335

This is my last build.  The 6 game machines are 3D printed in gray plastic by a guy in Winsted, CT.  The details are photos and paint.  Sizing  and cutting all the cabinet art took some time.

20200602_142002

This Nathans was made out of the tunnel insert from the brewery behind it.

20191120_130533

20191102_154228

Figuring out the proper angle of that hip roof was a doozy.

20190115_161922

The Lionel model of the Irvington factory, was much too large.  This modified version has the Miller Engineering roof and window signs, but the window sign is on the left, out of sight of the camera.

20181206_165103

The mall, like many others, was inspired by OGR posts.  The shops are lit from above, and also from cutouts of the foam behind them.

20180201_131033

The theater covers a large speaker box that opens into the rec room.  You can see the large wires going to it.

20180201_130920

This little scene models my basement rec room, with the large bar, pool table, stools, and game machines.  Those are actual mini-arcade games, fully licensed, completely playable, with original sounds and graphics.  They're out of scale of course, but the marquees light up and they look great.

20200519_074241

Years ago, I needed a station to support the trolley line above.  Given the dimensions, all I could do was cobble together scrap materials, including a large bathroom tile for the floor.  Although completely crude, it has grown on me.  Haha.

20200716_103913

There are many more, but these are some of my favorites.

Jerry

Attachments

Images (10)
  • 20200716_103335
  • 20200602_142002
  • 20191120_130533
  • 20191102_154228
  • 20190115_161922
  • 20181206_165103
  • 20180201_131033
  • 20180201_130920
  • 20200519_074241
  • 20200716_103913

Lots of great work on this thread!

I've posted many of these photos before, but I thought some here haven't seen them, both were scratch built with styrene and wood, both have completed detailed interiors and lighting as well:

Both my water tanks, the log cabin in the back corner, the largest of my three depots, the farmhouse and the two-story wood barrel component factory were scratchbuilt as well, thought none have interior details like the recent structures do...

Last edited by p51

JerryG, Trainman2001, jerryman, and others

What great work by all.  I am just awed.  Makes me hesitant about post my 50s style efforts.

  Yes ,I would say kits are welcomed as the skill and results are ever bit as good as many kitbashed or scratch buildings, better than any of mine for sure!

Keep sharing.  I am holding a couple of my small 50s style efforts for when the topic runs out of steam and needs to get back in circulation.

Charlie

@Jerrman posted:

Thank you, Ted. The comment is much appreciated. Any (likely undeserved) comparison to George’s work makes my day. I don’t want to hijack this great thread (since except for one, these are kits, not scratch or kitbashed) but, in answer to your request about more of my modeling based on George’s inspiration, here are a few favorites. The garage is Foscale, the barn is Laser-Art (I literally set it on fire to get the effect), I think the machine shop is Sierrawest, the scrap yard is part of scratch built scene, the water scene structure is Foscale, the skiff is ModelTechStudios.

 Jerman', A kit is only as good as what the modeler can do with it.  Everyone of your examples is a perfect blending of excellent modeling craftsmanship'.. An absolutely fabulous job. Impressions of George or not, these models have your touch and are quite distinguishable from any other modeler'...

Thanks for posting these beautiful models'....

I have only 3 or 4 kits on my layout. At least 50 + scratch built structures.  I really enjoy scratch building and is a very big part of the hobby for me.  I'm posting the ones I think you, as viewers will  enjoy seeing.... I must congratulate the many excellent builders and bashers that are posting.  Your work is excellent, and wonderful to see O scale structures at their finest'...👍🏻😀⭐

 

sta1bw

 

130_opt

 

P1000316_optsasseat1

 

SAM_0623

Attachments

Images (6)
  • sta1bw
  • 130_opt
  • P1000316_opt
  • sass
  • eat1
  • SAM_0623
Last edited by Quarter Gauger 48
@ToledoEd posted:

Steve24944, the coal elevator is such a clever idea. I just installed a 97 Coal elevator. Your model is an inspiration. Quarter Gauger 48 has encouraged me to build and this is a great subject. Hope you don’t mind I copy your concept.  

Go for it,  I got my idea for the 97 from some post I had found when I did a search on the internet some years ago.   Post some pictures when you do your project.

Steve

P7175041

In the top one, I wanted to get some real height to my city area. Except for the REA building on the left, the other ones are all about an inch thick.  The two apartment buildings are attached to the rear of the green building and are just carved out of pine boards.  The windows are Lionel.  They are from accessories and were very cheap to buy, even in large volume ( a necessity ).  The line of laundry just seemed like the thing to do.

In the one on the right , below, I wanted to do some stone structures. I made a mold  (really just a box) , poured plaster in it and added real stones.  Some grey paint mixed in with the plaster.  The other 3 walls are just thin plywood. (the sign says  "Buddy's Place.  Jazz nightly."  after the famous drummer Buddy Rich )

The Lionel Trains sign on top of the Madison Hardware came from Miller Engineering and flashes.  I love lights so the Miller Engineering products are a favorite - I have about 8 or them.

The left most, derelict building is carved from pine board.  The Wet Paint sign was thinned out and worked into the crevices in the Sellios manner.

 

P7175044

 

 

Like alot of people, I was fascinated by the 1949 Lionel Showroom layout as the photos appeared in the Lionel paperback books Model Railroading published by Bantam in the 50s and 60s.

One of my favorites was the Swifty Meat Packing Co on a sweeping curve in the corner of the layout. I believe it was based on a building by Frank Ellison on the Delta Lines.  The book conveniently provided all the dimensions, so building my own copy was a pretty reasonable task (page 214 of the 6th edition, for example).   Except for the windows, it is all scratch built.Swifty Meat Packing Co

John

Attachments

Images (3)
  • Swifty Meat Packing Co
  • P7175041
  • P7175044
Last edited by CPF3

I've started a new build, really don't know how I'm going to do it so just feeling my way along.

The pic with cardboard is for a mock-up, give me an idea of overall footprint.  Other pics of the little progress I've made so far.  Building is a mix of foamboard, leftover Ameri-Town fascades, joint compound and bass wood.

More to come, can't promise anything good.

20200618_09053120200713_18314120200713_183156

Attachments

Images (3)
  • 20200618_090531
  • 20200713_183141
  • 20200713_183156

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×