Skip to main content

"HONGZ" stands for HO scale, N scale, G scale, and Z scale.

Post your non-O scale stuff here!

Just ordered a mint in the original box late version of this engine. I had one of these back in the day when it first came out and it was a good runner. Later I acquired a 22852 DR mallet (1997?) with analog-activated digital sound start-delay circuitry, and also a great runner. I got the 2085D for an excellent price, especially in its unused condition. Looking forward to pulling my Alpine Classic coaches and my other RhB-Marklin LGB coaches with this engine! I never experienced any of the reported overheating of the forward motor block on my first 2085D those many years ago, but I always pulled a modest load, and only indoors. I never run my engines too hard, and am also prudent in filling those Seuthe smoke units!

Last edited by Tinplate Art
Original Post

Replies sorted oldest to newest

I received my new in the box, never run 2085D (1983 or later model with catenary warning decals) and it runs so smooth and quiet, with a great smoke unit! Only small issue was both cab figures had come unglued, and were loose in cab, but NO damage to figures or cab details. Used double sided mounting tape to avoid glue mess! Traction tire looks OK after 30 years, but I have a modern replacement if needed. The box, styrofoam insert and manual were all in perfect condition!

Last edited by Tinplate Art

I replaced the original traction tire which came off in one large piece, but now I have a squeak on the front motor truck. Will open up both gearboxes and lube all gears, axles and wheel bearings with LGB grease and oil and hopefully that will take care of the issue. I should have done that when I replaced the tire! My BAD!

Last edited by Tinplate Art

Earlier today, I opened both motor gearboxes and the axle bearings and all gearing were bone dry! I applied LGB grease to the gears and LGB oil to all axle bearings, as well as side rods, and voila: smooth quiet running! The LGB oil is a synthetic red gel lubricant and it is easy to see as it is applied and it adheres to those surfaces.

Last edited by Tinplate Art

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×