this is interesting; I recently removed the smoke resistor from this engine and what came out was a ceramic 30 ohm. I replaced it with a wire wound 27 ohm it was some improvement and today looking at the parts drawing for the same engine two resistors are listed; the ceramic 30 ohm and a wire wound 18 ohm 3 watt I know the 18 ohm will work the transformer more I am wondering if any of you have done this and what were the results. input greatly appreciated!  

Original Post

Add Reply

Likes (0)
Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×