I have a 6-18001 RI , I am hoping to purchase a Lionel 6-18009 on eBay. I have heard both of these locos have Nylon/Plastic gears. Where should I go to find brass/metal replacement gears? Any help would be greatly appreciated.Yours in railroading. Howie

Original Post

Hello Howie

the lionel 18001 Rock Island 4-8-4 "Northern" came with brass gear but the boiler casting is rough. I had one of those back in 1987.  It is a poor runner if you are aware of that but can be repaired.  It has the same chassis as a old 736.  I am not sure of the 18009 Mohawk as I never taken one apart.

Tiffany

I don't know the number of the correct ones but Lionel assembled the motors with the wrong bushings. An easy fix on this chassis. Once replaced the engine runs good. It was only made for 3 years and was a new casting.

 Glancy Trains Modular Group
   

Send an email to Lionel - they just created new brass gears or look at the Niagara thread I started last December. Lots of answers on where to get gears - try Gunrunner John - he's very knowledgeable on them.

 

UPDATE 5/25/16 WITH VIDEO !!!!!!!!!!! Niagara gears and drive shaft

 

TCA, METCA, LCCA, LRRC, MTHRRC, Atlas Golden Spike Club Charter Member, Bergen County Model RRC and NJ HiRailers Member.

 

If you haven't checked out the new NJ HiRailers website please do. Go to the "Photos" page to see galleries of our events and check the "What's New" page periodically to see what we've added.

 

 

 

Jim is correct, I had one of these, replaced the bushings and put spacer washers between the driven gear so that it stayed properly located. I wasn't super happy with the performance of it, but I was able to improve it enough to make the customer happy. Not one of my fun repairs, but I made it work. 

Luke

 

Port Clinton, home of the Reading and Northern RR.

Add Reply

Likes (0)
Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×