Skip to main content

Replies sorted oldest to newest

Thank you, you've saved me money as I was going to order one!

I've sat and listened as a tanker trains passed. Some flange squeal, a flat spotted wheel, maybe geese honking... Very little clickety clack around here nowadays, maybe at a crossing or switch. No banging, not from boxcars or gondolas or hoppers or flatcars or engines. None. Cost me money to send my PS-1 car back for a refund without ever unpacking it after viewing the videos with all the senseless banging emanating from the car.

 

In actual practice, just having one sound car doesn't cut it. You need a couple of them spaced out through the train for the effect to be right. Having more than one makes the noises that come out of them seem much more random and the stereo effect helps mask exactly which cars are making the noise. Just one car in the train is too direct and localized for it to work. With a few cars, some are squeaking and clunking while others bang and visa versa and it works quite convincingly. 

Last edited by Boilermaker1
Boilermaker1 posted:

In actual practice, just having one sound car doesn't cut it. You need a couple of them spaced out through the train for the effect to be right. Having more than one makes the noises that come out of them seem much more random and the stereo effect helps mask exactly which cars are making the noise. Just one car in the train is too direct and localized for it to work. With a few cars, some are squeaking and clunking while others bang and visa versa and it works quite convincingly. 

That maybe why I liked the ethanol set so much. Even the grandkids like it when they are in a train.

I bought one of the earlier sound boxcars, but I'm holding out for some command capable sound cars like the Vision Line stuff.  I have several sets of the PFE Reefers, a set of the Ethanol tank cars, and the PRR cattle car.  I'm considering dropping an ERR MC into the conventional sound car to allow remote control.  I could also put a relay on the min/max switch so I could remotely select that as well.

I have 2 sets of the VL PFE refers and 2 of the sound box cars.  The VL refers are great but I find that, except for showing off to visitors, rarely use all of their capabilities.  So essentially they spend  most of their life functioning the same as the sound box cars.  One note, the sound bytes used on the VL refers are a little bit different than the ones in the box cars.

gunrunnerjohn posted:
RickO posted:
If I were to pick nits, theres to many "clickety clacks" for a modern car riding on welded rail .

 

 

 

Maybe Rick, but if you're modeling the 1930's and 1940's, that would be prototypical.  The should just put those sound boards in 40' boxcars.

Funny you should say that John. I'm waiting to see how the "simplified" reefers with sounds are when they get delivered.

I'm interested in supplimenting the VL reefers on my "steam era" layout.

Those tankers sound decent, not all of the crazy banging of the PS1 cars.

Last edited by RickO

I just searched Utube again last night and did not get that video? Urggg. Thanks for sharing that.

I like the extra click clack as it sounds like it could be coming for all the cars in the trains. Most people don't like it, but trains are real noisy. If they were exact copying realism in sounds, it would be so bad no one would want it. That sheer squealing on curves of real trains drives me insane. 

I have 3 PS-1s and one tank car. I like them all. I prefer more flange squealing than banging sound, but I do like that when switching. You shove some cars with the engine, and there is banging as soon as the car moves, simulating the noise when real freight cars are shoved together. In a train moving on the main line, the banging would occur as the slack runs in and out.

I can see why you might not like that if your train is just running at a constant speed and level grade, all the banging makes less sense then.

PRRMP54 posted:
Engineer-Joe posted:

That maybe why I liked the ethanol set so much.

I have matching ECO-ENERGY TEIX  ethanol tanker sets; one sound, one non-sound. I do not like the sound car as it sounds to me like someone is inside the tank banging on the side with a spike maul plus I have never heard liquid inside a tanker sloshing around.

Haven't laughed so hard in a while!

Pat

 

ironman1 posted:

I have 3 PS-1 boxcars & 1 Tank car. They sound pretty much the same to me. They are more convincing spread out within a long train & you really need more than one. I'd like to hear more continuous squealing & a lot less clunking or no clunking at all. BTW, what is that clunking?

I too prefer more rail squeal to the clunking.  Thought the clunking was to represent a wheel flat spot more than a rail joint.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×