Skip to main content

Does anybody have the wiring break out (control box to main board) for the Lionel Scrambler.  There are 6 wires between the board and the controller.  The switch wiring are the green and white wires.  There are 4 additional wires, red, orange, black and blue.  From inside the controller it looks like only two of the wires were used.  These wires are used to turn on and adjust the volume.  It look like the other two wires are unused.  I looked at the board and I thought it was the red and orange wires.  I'm not even sure the  sound circuit works.  I got this in pieces and I bought a controller on eBay, I assumed the controllers are a common part.  Thanks for any help.



Images (3)
  • IMG_6754
  • IMG_6755
  • IMG_6756
Original Post

Replies sorted oldest to newest

Add Reply

This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)

Link copied to your clipboard.