Skip to main content

Replies sorted oldest to newest

I use a 10" straight section of fastrack. Then I cut a 4" section off K&S precision metals #9882 angled brass and file it smooth on ends. Next, I drill two 3/32" holes in the brass section 3/4" from each end. I line up the first hole 3 and 1/2" from the end with the connecting plate so the hole goes through that plate(9 ties) and drill the second hole on the track where the brass second hole lines up. Finally just screw a #4x3/8 screw in each hole to fasten the brass. You can make three sections of track with each K&S brass piece.

Attachments

Images (2)
  • 20230326_162111
  • 20230326_162308
Last edited by Delaware Dave

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×