Skip to main content

Recently purchased this item, and find it needs new traction tires.  Replacement of one set of tires appears to require removal of cro sheaf guides or cylinder castings.  To say “some disassembly required” is an understatement!  I hope you can direct me to a source for an exploded parts diagram and parts list.  Any serious advice on the disassembly/reassembly and parts sources is appreciated.  Thanks for your help.

Attachments

Images (1)
  • EAF132C4-713C-4879-A7B5-B28BB207E0B6
Last edited by Ohio Den
Original Post

Replies sorted oldest to newest

IMG_0695I recently had to replace the tires on the original B&O EM1 that looks like the same setup as you have. I had to buy these metric wrenches for the wheel screw removal since the supplied tool from Lionel would not fit over the screw head. The 5 MM is the correct size. It’s still a very frustrating job. I had to use two picks and a flat blade screwdriver to slide the tire around the wheel. It may just be easier to take the engine apart as shown in the video. 😁

Attachments

Images (1)
  • IMG_0695

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×