Skip to main content

Replies sorted oldest to newest

I had the same exact problem.  Its like the logic circuit on the board has gotten confused.  I never figured out a way to reset the board so both lights worked at the same time.  I discussed this with Mike Reagan when it happened.  He only had two suggestions.  Replace the board or wire both leds to the same same connector.  I ended up waiting for the 1/2 price parts sale and replaced the board.  I kept the original board as a spare.  The Led wires in the crane are very small so I went the easier route for me with the board swap.

Add Reply

Post
This forum is sponsored by Lionel, LLC
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×