Skip to main content

I bought a Lionel Berkshire engine a few months ago and had noticed that more often then not it would make a strange noise whenever it would pass over my switch. I havent thought of it too much lately as ive been working on the layout but I saw a PE berkshire do the same thing that my PRR one does while watching a video this morning. Does anyone know what this is and how I can fix it? Thanks in advance

Here is the video
Last edited by CoulstonR
Original Post

Replies sorted oldest to newest

That actually sounds more like Lionels " trainsounds"squealing brake sounds. I believe in the case of a "conventional" trainsounds locomotive it is triggered by a sudden drop in transformer voltage and or speed.

 

I suspect you have a drop in voltage at the switch, first off I'd start by cleaning the rails and see if it helps.

 

From the Lionel trainsounds owners manual:

 

Brake squeal
To activate the sound of squealing brakes, operate your locomotive at a rapid rate of speed
for at least ten seconds, and then throttle down to a lower speed. The brake sounds will
discontinue automatically after a few moments.

 

 

Last edited by RickO

I don't know for what reason, but to me it sounds like brake squeal.

Does your unit have 'Brake Squealing' capabilities?

Like Big Jim said the sound is prominent into curves, but also RickO said a drop in voltage, like when you activate the 'Braking' feature, the squealing sounds.

A few years ago I called Lionel, when they were still in Michigan, and I spoke to one of the    technicians and he told me when if the 'Braking' feature is properly working and the 'Brake' button is depressed, the voltage drops and the brake squeal sound is activated and the locomotive slows down.

When there 'Brake' button is released, then the locomotive picks up speed.

I would try to contact Lionel via phone.

They, or other more knowledgeable Forum members, would know.

Enjoy the child, enjoying your beautiful layout and trains.

Good Luck,

Ralph 

Last edited by RJL

 

quote:

From the Lionel trainsounds owners manual:

 

Brake squeal
To activate the sound of squealing brakes, operate your locomotive at a rapid rate of speed
for at least ten seconds, and then throttle down to a lower speed. The brake sounds will
discontinue automatically after a few moments.

I think what is happening in the video is that the train is slowing down when it hits the curves triggering the "Brake Squeal" effect. I don't see any reason to call Lionel as it seems to be doing what it supposed to do.

 

Being that the train is still going like gang busters through a curve, it sounds like rail squeal. But, that's just me after living with the ear-piercing squeal for forty years. Go out to your favorite tight curve on the RR and just listen for yourself.

 

Kind of a neat effect, but, I can hear that it could easily grate on one's nerves after a while.

 

The last time I ever heard a brake squeal like that was back when they still had cast iron brake shoes and then it was only when we were shifting cars at slow speeds. The composite shoes of today don't make those sounds.

 

BTW, the same sound (but much more intense) is made when cars go through a retarder after being humped.

 

 

Last edited by Big Jim

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×