Skip to main content

Replies sorted oldest to newest

Rocky Mountaineer posted:
crood58 posted:

Sean,

Your review was so good that I just ordered one. Thanks for convincing me...lol

Truly... this forum can be an expensive place to hang around!!!!    And don't forget to order the sounds building too. 

Yes, it can be! It also didn't help the bride told me to order it. LOL

I ordered the sound workhouse along with the plug n play pigtails. Thanks though.  

Last edited by crood58

I got my Beth. Steel Trackside Crane Friday. The manual side that when programming the id of the crane the lights will flash when it has been programmed. When I was programming the crane the lights weren't flashing and thought there was an error with programming the crane. I then tried to use the crane and it was programmed to the correct id. Just wanted to pass that along. I don't know if Sean mentioned that in his video or not.

Also, I tried playing with crane using the LCS app. It works nice, but does anyone know how to change between boom, big hook, or small hook in the app? 

Chris 

crood58 posted:

I got my Beth. Steel Trackside Crane Friday. The manual side that when programming the id of the crane the lights will flash when it has been programmed. When I was programming the crane the lights weren't flashing and thought there was an error with programming the crane. I then tried to use the crane and it was programmed to the correct id. Just wanted to pass that along. I don't know if Sean mentioned that in his video or not.

Also, I tried playing with crane using the LCS app. It works nice, but does anyone know how to change between boom, big hook, or small hook in the app? 

Chris 

Yes it is in the video.   I believe the manual was just copied from the crane cars manual.  On the crane cars there is a working Rear cab light.  That would flash when programming.  Sine they dropped the rear led light on the trackside crane it's not there to flash on programming.  No big deal but they should of corrected the manual or kept the rear cab light!  Haha. Also manual does not mention you need to set engine type to CRN (crane) to get the icons.  Lionel responded and confirmed that too.  Just some incorrect info in manual.  

SandJam posted:
crood58 posted:

I got my Beth. Steel Trackside Crane Friday. The manual side that when programming the id of the crane the lights will flash when it has been programmed. When I was programming the crane the lights weren't flashing and thought there was an error with programming the crane. I then tried to use the crane and it was programmed to the correct id. Just wanted to pass that along. I don't know if Sean mentioned that in his video or not.

Also, I tried playing with crane using the LCS app. It works nice, but does anyone know how to change between boom, big hook, or small hook in the app? 

Chris 

Yes it is in the video.   I believe the manual was just copied from the crane cars manual.  On the crane cars there is a working Rear cab light.  That would flash when programming.  Sine they dropped the rear led light on the trackside crane it's not there to flash on programming.  No big deal but they should of corrected the manual or kept the rear cab light!  Haha. Also manual does not mention you need to set engine type to CRN (crane) to get the icons.  Lionel responded and confirmed that too.  Just some incorrect info in manual.  

Sean, 

I thought they meant the front lights. I must of missed that in the manual. I agree it's no big deal. The crane and crane house is awesome.

As I mentioned above I got the crane to work in the LCS app, but can't  find how to switch boom or the different hook operations in the app.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×