Skip to main content

We recently purchased a beautiful Lionel Burlington E6 dummy a unit with TMCC controlled lights and smoke. The springs are missing that bridge the light unit (black box) with the chassis and I would like to know  what they look like please?  There are 4 of them.

Also the smoke unit only 'pulses' rather than run constantly with the Cab1 or in conventional.

Suggestions please?

Thanks

Original Post

Replies sorted oldest to newest

Originally Posted by c.sam:

We recently purchased a beautiful Lionel Burlington E6 dummy a unit with TMCC controlled lights and smoke. The springs are missing that bridge the light unit (black box) with the chassis and I would like to know  what they look like please?  There are 4 of them.

Also the smoke unit only 'pulses' rather than run constantly with the Cab1 or in conventional.

Suggestions please?

Thanks

The smoke unit pulsing could mean the loco has been programmed as a steamer and may need to be reset with a different code.  It could also mean the fan blade may be i binding inside the fan chamber.

 

Sorry, can't help with the spring thing. 

 

Fred

Thanks Chuck. It came without springs so we could certainly use some. What do they look like please?

Reason is I came across a small bag with 4 'copper' coiled springs with a 1/4" tail on one end that look like they might work. I am unable to get them in the black box that the two  light plugs attach to however.

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×