Skip to main content

Gents,

My 1990's vintage Lionel Gantry Magnetic Crane doesn't not "magnetize."   Wires and connection points look good, motors and rotations work fine.   Anyone know a good source or suggestion to get a new magnet to wire in?   Part number and source would be helpful.  I'd like to order immediately to fix this.   Thanks.

Original Post

Replies sorted oldest to newest

You might fix (clamp?) the magnet energizer button in the on position while passing an iron (or ferritic stainless) piece near its face.  Then try wiggling the magnet wire at the magnet, along its length, and near its connection at the base unit to see if you can find an intermittent connection that might be repaired.

Jeff at The Train Tender can probably help you with a replacement part.

KD

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×