Skip to main content

Replies sorted oldest to newest

To update this post. This is a Lionel GP7 GM50. conventional. It needs the middle large gear. I removed motor truck, kinda. I wasn't able to figure out how to get the silver plate off, yes I broke the e clips too. I am unable to go much farther. If anyone can help would greatly appreciate it.  I could use a parts list, or exploded view. also is it just easier to replace motor truck, if I can ever figure out how to get it apart. Thanks. See attached photos

Attachments

Images (4)
  • 20221122_155553
  • 20221122_155537
  • 20221122_155530
  • 20221122_155516
Last edited by ROB O GAUGE KID

Thanks Jeff. Yes I am coming to that realization. I may look into getting an old 600 motor and trucks. see if that will work.

Jeff thanks very much. I will call jeff tomorrow. I also think your right about the repairman, this isn't something "easy". I will look into that tomorrow as well.

No need to disassemble any further.  This is a nylon gear and is an easy interference fit into that worm axle... a tiny dab of LockTite will be fine.

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×