How does this attach on the bottom of the locomotive? Could someone take a photo for me?
Thanks
Scott Smith
Attachments
Images (2)
Original Post
Replies sorted oldest to newest
It's held on by a couple of screws. See the attached lousy picture. The two larger screws closest to the front of the loco are the attachment points for the piece in your post. There is another plated piece that needs to be removed first (has a guide for the tab on the pilot truck) - did it fall off too?
Be sure to orient the piece so that the raised portion points downward, so that it helps to guide the tab on the pilot truck.
Hope you can find the screws.
Attachments
Images (1)
@Mallard4468 posted:It's held on by a couple of screws. See the attached lousy picture. The two larger screws closest to the front of the loco are the attachment points for the piece in your post. There is another plated piece that needs to be removed first (has a guide for the tab on the pilot truck) - did it fall off too?
Be sure to orient the piece so that the raised portion points downward, so that it helps to guide the tab on the pilot truck.
Hope you can find the screws.
I found one screw. That was enough to find out that those screws are #8. A big thanks to you for your help with the picture. I was able to put it back together.
Scott Smith
