Skip to main content

Replies sorted oldest to newest

It's held on by a couple of screws.  See the attached lousy picture.  The two larger screws closest to the front of the loco are the attachment points for the piece in your post.  There is another plated piece that needs to be removed first (has a guide for the tab on the pilot truck) - did it fall off too?

Be sure to orient the piece so that the raised portion points downward, so that it helps to guide the tab on the pilot truck.

Hope you can find the screws.

IMG_1776

Attachments

Images (1)
  • IMG_1776
Last edited by Mallard4468
@Mallard4468 posted:

It's held on by a couple of screws.  See the attached lousy picture.  The two larger screws closest to the front of the loco are the attachment points for the piece in your post.  There is another plated piece that needs to be removed first (has a guide for the tab on the pilot truck) - did it fall off too?

Be sure to orient the piece so that the raised portion points downward, so that it helps to guide the tab on the pilot truck.

Hope you can find the screws.

IMG_1776

I found one screw. That was enough to find out that those screws are #8. A big thanks to you for your help with the picture. I was able to put it back together.

Scott Smith

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×