Re: Lionel JLC Allegheny 6-38081

SecariderOGR Forum Member SUPPORTING MEMBER

My son just picked up a used Lionel JLC Allegheny in rough condition. I tested the set, the locomotive seems to run good. The tender has whistle, bell and crew talk. But the chuffing does not work. I tried to reset the locomotive, and it did not help. Could someone tell me what parts may be causing the steam chuffing to not be working. The tender also had 2 wires cut and soldered, that lead to wireless tether. One wire the electrical tape came off, and may have been grounding out. Thank you

4/23/2111:30 AM

❤️ 0

Original Post

Replies sorted oldest to newest

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Since the other command functions work, the top suspect is the chuff switch. However, I'd clean up the wireless tether wiring to make sure you don't cook some other components.

The chuff switch is located above the rear driver on the rear set of drivers. The picture below shows the location of the cam that actuates the chuff switch. The actual chuff switch looks like the other shot, though the colors of these vary with models, years, and the phase of the moon.

Many times you'll find either a wire broken off or the switch lever just needs a little bend to get it back in operation. If you need a new switch, they're cheap and readily available as well.