Skip to main content

Gents

Well I have everything (I thought !) to begin my Lionel LCS set up.

I need to order another PDI cable.  The 10 ft are the same price as the 20 ft so 20 ft it is.

Aside from this:

I have a 9 pin going from my Legacy Base (See pic) to my TPC 400 (two wires end up on DAT and COM on the TPC 400).

Do I simply move this 9 pin from the Legacy Base to the 9 pin on the SER2  -  OR do I need to attach wires from the OUTPUT / COMMON on the SER2 to the DAT / COMMON on the TPC 400?

Thank You

Dave

 

7f479300cf3217256118a2a703db2cc26286456c07a23e55b5888ecf2c650dd4f7d9dd0063a5aac3

Attachments

Images (2)
  • 7f479300cf3217256118a2a703db2cc26286456c
  • 07a23e55b5888ecf2c650dd4f7d9dd0063a5aac3
Original Post

Replies sorted oldest to newest

USCGRET posted:

Thanks Dave.  The way I see it, is to connect the Legacy base to LCS wifi, LCS wifi to SER2, (connect the TPC 400 with the DB9 cable into the SER 2.  Also I want to attach my older device ASC 6-14182.  I think my attached diagram is correct.  

You are correct. You can then use the ASC like normal with this configuration.

Soo Line posted:

to use it for my MTH TIU to incorporate MTH WIFI

Why in the world would you want to do this?? 

But yes, that's correct. The TCP can connect to the DAT and COM connections on the SER2 to free up the DB9 plug.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×