Skip to main content

Replies sorted oldest to newest

Since that's an early Legacy, the top suspect is the smoke regulator module.  The smoke unit isn't doing anything to smoke volume.  However, since that unit has the 6 ohm resistor, when you replace the regulator module, replace the resistor with the 8 ohm one, that was recommended by Lionel years ago as the 6 ohm resistors were too hard on the regulator modules and caused premature failure. (sound familiar?)

Attachments

Images (1)
  • mceclip0

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×