Skip to main content

So i have a New Lionel legacy w/bluetooth J1a 1931420 that was working fine.

Now, on the cab 2 remote, once i turn the velocity wheel to 1, The cab light goes out the sounds start like normal it looks like it wants to go with slight movement being observed on the side rods however i need to continue to at least "30" to get it to start rolling at the same speed it was rolling at setting "1". I put a load of about 10 cars and need to go to "50" to get it to move. There is no other issue with any other features. No difference with smoke on or off, no blinking cab light. With the engine on a test track, I have reset the engine multiple times. Cleared it on the remote and reprogrammed it several times. There is no Odyssey II on/off switch on this engine. All other Legacy steam engines run fine.

I am at a loss with this one.

Last edited by SLQ32
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×