Skip to main content

Replies sorted oldest to newest

gunrunnerjohn posted:

The ditch lights are LED's, a 1K resistor and a 9V battery will test them.  Pull the connector from the board and power them from the battery through the 1K resistor.  If they don't light one way, reverse the connections.  If the bulb is bad, it won't light with either polarity.

With a 1k resistor and 9v both will light up with positive to gray and negative to black.  This is obviously with the connector removed. 

 

gunrunnerjohn posted:

The ditch lights are LED's, a 1K resistor and a 9V battery will test them.  Pull the connector from the board and power them from the battery through the 1K resistor.  If they don't light one way, reverse the connections.  If the bulb is bad, it won't light with either polarity.

 Did a factory reset as per manual. Now both are out lol. Shipping it out tomorrow. 

gunrunnerjohn posted:

The ditch lights are LED's, a 1K resistor and a 9V battery will test them.  Pull the connector from the board and power them from the battery through the 1K resistor.  If they don't light one way, reverse the connections.  If the bulb is bad, it won't light with either polarity.

 Did a factory reset as per manual. Now both are out lol. Shipping it out tomorrow. 

gunrunnerjohn posted:

Well... that's odd!

And no I didn't overlook the aux 2. Plus lights between the number boards work. 

My luck with new Lionel engines is just becoming comical at this point. It's funny yet sad that a problem or defect won't even make me blink anymore.  I'm happy my engine roster is complete as of this weekend for a long time to come.

 

Last edited by Sparky74
Sparky74 posted:
gunrunnerjohn posted:

Well... that's odd!

And no I didn't overlook the aux 2. Plus lights between the number boards work. 

My luck with new Lionel engines is just becoming comical at this point. It's funny yet sad that a problem or defect won't even make me blink anymore.  I'm happy my engine roster is complete as of this weekend for a long time to come.

 

Sparky I am SOOOO with you.Was opening a brand new Engine the other day.I heard something rattling inside - Laughed- pushed the styrofoam back in and sent it back.I am set for a while too.Nick 

Sparky74 posted:
gunrunnerjohn posted:

Well... that's odd!

And no I didn't overlook the aux 2. Plus lights between the number boards work. 

My luck with new Lionel engines is just becoming comical at this point. It's funny yet sad that a problem or defect won't even make me blink anymore.  I'm happy my engine roster is complete as of this weekend for a long time to come.

Had an SD70ace where one of the ditch lights did not work, opened it up and one wire was pulled out of the connector, don't think they were able to fix it. Not even enough slack to allow for assembly & disassembly from chassis . Not sure how they expected the poor Chinese person to assemble it.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×