Skip to main content

Replies sorted oldest to newest

@DaveP posted:

Actually... it's the newer lift bridge. That controller is hard to come by. I think you can get away with a basic STDP switch On-Off-On

71-4167-250-2_Page_6

Well,  I sent the OP an e-mail thinking I knew what he wanted.  There are more than one type of cable to make the bridge work.  Power cable and those attached to the weights.  I thought he was looking for the ones that attached to the weights.  They are available.

The controller is not rare and is available.  It is the same as those used to control Lionel tubular switches.

Also if you have Lionel ASC’s they can control the bridge wirelessly with either CAB1, 1-L or Legacy 990.  You might also be able to use Lionel’s SC1or 2’s as well.

Last edited by WaynePa

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×