Skip to main content

My Lionel Class A just celebrated its 20th birthday with me this week.  It was  an awesome college graduation gift from my parents in 2000.  At the time, it was big deal as it was one of the first large scale articulated steamers that had actual classification lights as prior units had molded in lenses like the first release allegheny and big boy.   It has  a great hooter whistle that can be turned up very loud.  It was allot of fun and it has always been reliable.

Fast forward to today, and this engine had been sitting on the shelf for while, as it was not as much fun to operate as the newer stuff.  It did not come with odyssey, and as I got older, the gap between the engine and tender really bothered me as it seemed huge.  The two chuffs per revolution also seemed a bit outdated  This last week I decided to do something about this and order a new ERR Cruise Commander M from Royz trains.  I included some pictures of the upgrade for others if they might reference.

While the Cruise Commander is mostly a drop in replacement, it was not clear to me where the serial wire from it needed to land on the R2CL module.  After some research here on the forum,  I attached it to the existing board as shown below (it is blue)57E595C3-6E7E-4BC4-81EC-6AA9A14F25B5

Notice the other wire (Green one) coming out of the same plug, I just removed it.C21CA69D-DADC-4492-BEC2-77C5965C77C4

All boards installed

653ACD6A-2276-4AE4-8395-214F9846E154EC7BD2F2-EBE8-4142-A946-DCAE2B9CC70A

I tuned up the smoke unit by drilling the intake hole to match the size of the whole in the gasket between the circuit board and cast pieces.  I also tried a different approach with the smoke wick, where I unsoldered the Lionel resistor and threaded it into (inside the rope) a new rope wick and re soldered. Not sure if any one else is doing this.  I liked this approach because there is an easy path for air to move above the resistor to the output hole, with the extra wick length fluid can easily be extracted out of the reservoir and lastly, it maximizes the amount of smoke fluid contact with resistor.   Not sure how this will work out yet in the long run, but it seems to work great so far , with smoke output equivalent to a mth ps1 engine.

1689AA0B-1C37-4632-9EDD-286582F9C5D6

042C51F7-4792-476F-90BA-7E4AFC2E32DF

I also built a new draw bar that brings the engine and tender 1/2” closer, but still allows for O72.  No brake here, I ended up using clamps to bend and limited set of Dremel bits.  Pretty crude.  First attempt at this was 1/8” too close, so I ended up cutting it and soldering an extender into it.
A5DD8C8F-9740-4AD6-862C-057FEB24A460

73A9047D-5DAA-485F-A27A-E6B85C927437

Lastly, I increased to 4 chuffs per revolution by adding a reed switch to the trailing truck and some magnets.  I glued a piece of tube styrene that could hold and protect the switch to the truck.  The chunk of tube missing is the side I glued to the truck.   I then took the wires through the draw bar and into the engine.

Note:  If I was doing this again, order a couple of reed switches as they are glass and very fragile. I broke two of them working through this process.  

Tracing the black wire from the micro switch on the back set of drivers to the board set, determines where to land one of the wires from the reed switch after removing the existing  black wire.  The other wire from the reed switch is tied to any ground reference convenient on the engine.

I’m the end, I thought this came out really nice.

78A2B1B3-AC94-42F8-8D9F-2A8F22DB7BE9
top view35E22377-0E74-4C82-A5FB-0999FACA7425

bottom view7C846055-A6F8-439D-94EA-76EA7DC85096

6BF7AD9B-6E58-4297-8B9B-D50D25F87A5F

1884D8C5-BB65-448D-B19B-210B0466E4EC

E40D83F2-BFE4-4810-8148-22A5024CDEE5

58F5E504-4F6C-4D49-A834-5735002C158C

60EE601E-F35B-44F5-A22D-9625858B1CB7

It is amazing what a different the cruise commander upgrade made.  Shown is a video where it is moving in speed step 1, that includes the 4 chuff upgrade and reduced gap between tender and engine.

Mike

Follow my layout progress at:

https://ogrforum.ogaugerr.com/t...f-layout-landscaping

 Note: I am still editing this and adding notes. 

Attachments

Images (16)
  • C21CA69D-DADC-4492-BEC2-77C5965C77C4
  • 1689AA0B-1C37-4632-9EDD-286582F9C5D6
  • A5DD8C8F-9740-4AD6-862C-057FEB24A460
  • 6BF7AD9B-6E58-4297-8B9B-D50D25F87A5F
  • 1884D8C5-BB65-448D-B19B-210B0466E4EC
  • E40D83F2-BFE4-4810-8148-22A5024CDEE5
  • 60EE601E-F35B-44F5-A22D-9625858B1CB7
  • 58F5E504-4F6C-4D49-A834-5735002C158C
  • 57E595C3-6E7E-4BC4-81EC-6AA9A14F25B5
  • 042C51F7-4792-476F-90BA-7E4AFC2E32DF
  • 653ACD6A-2276-4AE4-8395-214F9846E154
  • EC7BD2F2-EBE8-4142-A946-DCAE2B9CC70A
  • 73A9047D-5DAA-485F-A27A-E6B85C927437
  • 78A2B1B3-AC94-42F8-8D9F-2A8F22DB7BE9
  • 35E22377-0E74-4C82-A5FB-0999FACA7425
  • 7C846055-A6F8-439D-94EA-76EA7DC85096
Videos (2)
trim.36DAD9E4-6CAB-4A0A-9E70-0552EF0D6196
trim.6557B224-2F6C-4CDB-B121-FE44354F96C1
Last edited by Hump Yard Mike
Original Post

Replies sorted oldest to newest

Mike, I could have sold you the Super-Chuffer II and the Chuff-Generator and given you a nice smoke control upgrade. You get 4 chuffs, great chuffing performance, smoke at idle, as well as automatic Rule-17 headlight control and cab light control in the upgrade.   No fooling around gluing magnets to wheels...

Last edited by gunrunnerjohn

Nicely done Mike. Its a whole lot more satisfying when you are able to do these ungrades using your own ingenuity. As you found out with your homemade drawbar its relatively easy to add or subtract metal. In the future you can modify the existing drawbar simply by cutting it, wire brushing off the blueing and soldering it back together at the desired length. No need to scratch build a new one.

Pete

Mike, I could have sold you the Super-Chuffer II and the Chuff-Generator and given you a nice smoke control upgrade. You get 4 chuffs, great chuffing performance, smoke at idle, as well as automatic Rule-17 headlight control and cab light control in the upgrade.   No fooling around gluing magnets to wheels...

Wow, John!  These two items cost almost $104.98 versus buying a blower type smoke unit with great smoke performance and low/high fan speed to support existing chuff inputs for $45.  The chuff input for this smoke unit is compatible with the Cruise Commander making.  Enjoy!  

@Falcon70 posted:

Mike, with Norton on this; you came up with some cool upgrades on your own; you devised them and built them!  Great work; much more satisfaction to solve and fix yourself; nice work!  Falcon70

...   ...

Plus, that's pretty "ballsy" of you to break into a perfectly good unit, take it down and modify/improve it like that...you're a better man than I. 

Mark in Oregon

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×