Skip to main content

I am using gargraves track on my layout and I am wondering if I can and if so how to use  RCS track rails for unloading? Is is also possible how to use the other rails on the RSC track for uncoupling on gargraves track? If all possible I would l would appreciate as how to wire it in and what type of activation device to use

Thank you very much, Jerry  jba435@gmail.com 20190309_135308

 

 

 

Attachments

Images (1)
  • 20190309_135308
Original Post

Replies sorted oldest to newest

The item in your picture is wired as follows, starting at the bottom of your picture, first screw terminal is the outside rail, second is the next rail in, third is the center rail, forth is the other accessory rail.  I just placed one of these on my text bench.  I connected the first two terminals and ran a momentary switch (button) from the hot side of the transformer to terminal 4.  This will make operating cars work.  There is no way to uncouple with this track.  

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×