Skip to main content

I did my first full train repaint and restoration over the past year.  I thought it might be interesting to forum members.   When I received the train it basically ran but had been repainted already very poorly so I decided to strip it and repaint and rebuild the entire train.  The original engine wheels had been replaced with self made wheels which seemed to operate okay so I left them as they were.  I just cleaned up the motor, repaired the whistle and rebuilt all the vestibules and trucks.  The last two cars are original but the engine has replacement red lights in the front and replacement side window plastic.  The windshield and headlight lens are original I believe.  

Here's how it looked when I purchased it.  I have already removed the numbers and UP emblems.

750F5546-CD1F-4EC0-ACB1-7498A901B460_1_201_aF3B4BFD8-DB6F-426E-AEE2-843986087594_1_201_a

I stripped everything with an excellent product,  Hi Speed Ready strip, no odor and works well.  Great for Matchbox car restorations!

BA7EB2BB-374A-4577-A0DD-34F69A945978_1_201_aEC6A9FA8-5F89-42B2-B203-BBAB51A9C7FF_1_201_a

Fortunately I did not have to remove the wire and light bulb socket on the vestibules. The wire was still in good shape.

4EC0B738-B1C3-41C1-8A05-DC55F83AD018_1_201_a0487911D-B1D5-4C06-B2BE-E4F9D1B272D1

I had to do a little body work on the left red marker light housing.  

1AF293B0-E95A-45E8-B940-94CB8F3E9A3A

The trucks were the most work, lots of pieces but original and complete.  Rebuilding took time because you have to instal the vestibule body first then the truck side supports due to how everything is held together by twisting metal tabs.  If you have worked with pre war stuff you know the bending and twisting of the tabs can result in them breaking off.  I bought some very thin two sided tape and used it to help hold the wheel axle sides to the inside of the truck frame on the ones where the tabs had broken.

7FE7DB6C-F0E1-405D-A008-9EDFDFF8182A_1_201_a

I primed everything before final coats.

3927E179-75F4-4750-B1A2-14097A387ADA_1_201_a1082A117-1BE1-4A18-8CA7-D7B5D37725C3_1_201_a

The engine only looks blue, it's the same primer.  I was pleasantly surprised by how good the castings were.  There were a few dents in some of the passenger cars which I left alone.

887E8227-8CD2-4021-8E2D-7F78C7A6A196_1_201_aF245A486-91EF-42BC-AD8A-26D54F0EEE76_1_201_a3DD2724F-439F-4F0E-B13F-55EDD5367E4F_1_201_a8C2EB50C-8D31-46B2-8BDB-88F00F1874EA_1_201_a

Masking was a big job before painting due to the two tone paint scheme, plus black for the ends of the cars.  Initially I just used 3M painters tape.

798C16F7-F67E-4918-B615-EB149E650886

I used the Collector Color from Hennings below.  It's enamel but it went thru the air brush well and was easy to use.  Of course it took at least a week to dry and I was happy to just let it sit.  I over diluted the yellow at first so that required two coats.  The brown I did about 70% paint and 30% Naptha.  Naptha was recommended by Hennings and it worked well.

6087FE9B-0D77-4965-8249-61C936718083DB69D5FF-3954-4B10-909F-A670A2D0A199_1_201_aC4291991-7DB0-4C7D-943E-8E09CF5E1CB6_1_201_a

One of the lugs on the engine bottom was broken off and it took me a while to successfully reattach it.  I tried super glue with baking soda, which did not work well and finally tried two part epoxy and it worked well on the second attempt.

CF1C1A91-99DF-448E-9754-32B05293E89FE6AC5ADA-4A7A-4389-A171-A7371FCCB59F

First coat of yellow.  I used a pistol grip air brush that I am finally learning to use ok.  

533FEAA8-882F-41B5-96A4-BC0157C99BD5_1_201_a

Three of these are mine but the fourth belongs to a friend who has the same set, also repainted.  Can you tell which one is different?  

FD1A01F7-6F4B-4950-9A4C-E54316C39E7B

Then the brown, went on well and I am happy with the results.  I used FrogTape masking tape and it worked great with no bleed under at all!  I recommend it.  

32A1BD71-D88F-44B3-9588-C830626D21FB_1_201_a0C8CD32F-67EC-4104-94B5-EAEB69117646_1_201_a3D00D2BF-7183-4FC3-A29A-32CCAFB80AD6_1_201_a181B9D01-826C-407C-93CD-598B94513641_1_201_aA03DAF0B-C432-4F3F-819C-6897621A130C_1_201_a

Getting near the end!

50D58095-E513-4D96-BF41-35FE7A8D40AD_1_201_aB59B30AE-136C-4080-A605-6CA7DF20686F_1_201_a9C7F3262-77F3-45A0-82D9-D49552B7DBD6_1_201_a

I had to make a few grab irons, I bought stock rod from Jeff Kane of The Train Tender.  He is great to work with and really seems to know about all the parts he has.  I order from him regularly.

A666D815-FFE2-44E3-8E67-E48376C06BE4_1_201_a

Finished train.  I decided to leave the grill unpainted, since they weren't painted on the real trains.  After all this was not intended to be a true restoration, just close.  

F3F67C8F-D57E-4034-91C7-D6A32D322880_1_201_a85AACB1C-0C67-44F9-90E5-13AC7FE275AA_1_201_a

I had to clean and rebuild the whistle and get a relay for it since it was missing.  The whistle works great even after 60 years!  The pre war whistles are all metal including the box and it is riveted together, so thankfully I did not have to take it apart.  I just cleaned the brushes, oiled it and resoldered some wires.

So that's it, was hoping for a video but while engine runs on my test track, it doesn't run well on my CC!  Guess I better clean the track.  

It took me about a year to complete this due to over thinking and procrastination plus other 'jobs' but I am happy with the result.  I forgot to mention that this engine did not have an E unit, so it only runs forward and I left that alone.  I'm happy I got the whistle working well.  

I hope you enjoyed this, if I can do it, so can you.  Make sure you are comfortable with your air brush, it makes all the difference.  You will spend more time cleaning the air brush than actually painting, get used to it!  If you have any questions I am happy to help.  

Attachments

Images (35)
  • 750F5546-CD1F-4EC0-ACB1-7498A901B460_1_201_a
  • F3B4BFD8-DB6F-426E-AEE2-843986087594_1_201_a
  • BA7EB2BB-374A-4577-A0DD-34F69A945978_1_201_a
  • EC6A9FA8-5F89-42B2-B203-BBAB51A9C7FF_1_201_a
  • 4EC0B738-B1C3-41C1-8A05-DC55F83AD018_1_201_a
  • 0487911D-B1D5-4C06-B2BE-E4F9D1B272D1
  • 1AF293B0-E95A-45E8-B940-94CB8F3E9A3A
  • 7FE7DB6C-F0E1-405D-A008-9EDFDFF8182A_1_201_a
  • 3927E179-75F4-4750-B1A2-14097A387ADA_1_201_a
  • 1082A117-1BE1-4A18-8CA7-D7B5D37725C3_1_201_a
  • 887E8227-8CD2-4021-8E2D-7F78C7A6A196_1_201_a
  • F245A486-91EF-42BC-AD8A-26D54F0EEE76_1_201_a
  • 3DD2724F-439F-4F0E-B13F-55EDD5367E4F_1_201_a
  • 8C2EB50C-8D31-46B2-8BDB-88F00F1874EA_1_201_a
  • 798C16F7-F67E-4918-B615-EB149E650886
  • 6087FE9B-0D77-4965-8249-61C936718083
  • DB69D5FF-3954-4B10-909F-A670A2D0A199_1_201_a
  • C4291991-7DB0-4C7D-943E-8E09CF5E1CB6_1_201_a
  • CF1C1A91-99DF-448E-9754-32B05293E89F
  • E6AC5ADA-4A7A-4389-A171-A7371FCCB59F
  • 533FEAA8-882F-41B5-96A4-BC0157C99BD5_1_201_a
  • FD1A01F7-6F4B-4950-9A4C-E54316C39E7B
  • 32A1BD71-D88F-44B3-9588-C830626D21FB_1_201_a
  • 0C8CD32F-67EC-4104-94B5-EAEB69117646_1_201_a
  • 3D00D2BF-7183-4FC3-A29A-32CCAFB80AD6_1_201_a
  • 2F254BC0-F5EE-4553-A03E-527798AEA062_1_201_a
  • 181B9D01-826C-407C-93CD-598B94513641_1_201_a
  • A03DAF0B-C432-4F3F-819C-6897621A130C_1_201_a
  • 50D58095-E513-4D96-BF41-35FE7A8D40AD_1_201_a
  • B59B30AE-136C-4080-A605-6CA7DF20686F_1_201_a
  • CFE68979-8705-4050-A4FC-87A1CD43E634_1_201_a
  • 9C7F3262-77F3-45A0-82D9-D49552B7DBD6_1_201_a
  • A666D815-FFE2-44E3-8E67-E48376C06BE4_1_201_a
  • F3F67C8F-D57E-4034-91C7-D6A32D322880_1_201_a
  • 85AACB1C-0C67-44F9-90E5-13AC7FE275AA_1_201_a
Original Post

Replies sorted oldest to newest

@pennsydave posted:

I did my first full train repaint and restoration over the past year.  I thought it might be interesting to forum members.   When I received the train it basically ran but had been repainted already very poorly so I decided to strip it and repaint and rebuild the entire train.  The original engine wheels had been replaced with self made wheels which seemed to operate okay so I left them as they were.  I just cleaned up the motor, repaired the whistle and rebuilt all the vestibules and trucks.  The last two cars are original but the engine has replacement red lights in the front and replacement side window plastic.  The windshield and headlight lens are original I believe.  

Here's how it looked when I purchased it.  I have already removed the numbers and UP emblems.

750F5546-CD1F-4EC0-ACB1-7498A901B460_1_201_aF3B4BFD8-DB6F-426E-AEE2-843986087594_1_201_a

I stripped everything with an excellent product,  Hi Speed Ready strip, no odor and works well.  Great for Matchbox car restorations!

BA7EB2BB-374A-4577-A0DD-34F69A945978_1_201_aEC6A9FA8-5F89-42B2-B203-BBAB51A9C7FF_1_201_a

Fortunately I did not have to remove the wire and light bulb socket on the vestibules. The wire was still in good shape.

4EC0B738-B1C3-41C1-8A05-DC55F83AD018_1_201_a0487911D-B1D5-4C06-B2BE-E4F9D1B272D1

I had to do a little body work on the left red marker light housing.  

1AF293B0-E95A-45E8-B940-94CB8F3E9A3A

The trucks were the most work, lots of pieces but original and complete.  Rebuilding took time because you have to instal the vestibule body first then the truck side supports due to how everything is held together by twisting metal tabs.  If you have worked with pre war stuff you know the bending and twisting of the tabs can result in them breaking off.  I bought some very thin two sided tape and used it to help hold the wheel axle sides to the inside of the truck frame on the ones where the tabs had broken.

7FE7DB6C-F0E1-405D-A008-9EDFDFF8182A_1_201_a

I primed everything before final coats.

3927E179-75F4-4750-B1A2-14097A387ADA_1_201_a1082A117-1BE1-4A18-8CA7-D7B5D37725C3_1_201_a

The engine only looks blue, it's the same primer.  I was pleasantly surprised by how good the castings were.  There were a few dents in some of the passenger cars which I left alone.

887E8227-8CD2-4021-8E2D-7F78C7A6A196_1_201_aF245A486-91EF-42BC-AD8A-26D54F0EEE76_1_201_a3DD2724F-439F-4F0E-B13F-55EDD5367E4F_1_201_a8C2EB50C-8D31-46B2-8BDB-88F00F1874EA_1_201_a

Masking was a big job before painting due to the two tone paint scheme, plus black for the ends of the cars.  Initially I just used 3M painters tape.

798C16F7-F67E-4918-B615-EB149E650886

I used the Collector Color from Hennings below.  It's enamel but it went thru the air brush well and was easy to use.  Of course it took at least a week to dry and I was happy to just let it sit.  I over diluted the yellow at first so that required two coats.  The brown I did about 70% paint and 30% Naptha.  Naptha was recommended by Hennings and it worked well.

6087FE9B-0D77-4965-8249-61C936718083DB69D5FF-3954-4B10-909F-A670A2D0A199_1_201_aC4291991-7DB0-4C7D-943E-8E09CF5E1CB6_1_201_a

One of the lugs on the engine bottom was broken off and it took me a while to successfully reattach it.  I tried super glue with baking soda, which did not work well and finally tried two part epoxy and it worked well on the second attempt.

CF1C1A91-99DF-448E-9754-32B05293E89FE6AC5ADA-4A7A-4389-A171-A7371FCCB59F

First coat of yellow.  I used a pistol grip air brush that I am finally learning to use ok.  

533FEAA8-882F-41B5-96A4-BC0157C99BD5_1_201_a

Three of these are mine but the fourth belongs to a friend who has the same set, also repainted.  Can you tell which one is different?  

FD1A01F7-6F4B-4950-9A4C-E54316C39E7B

Then the brown, went on well and I am happy with the results.  I used FrogTape masking tape and it worked great with no bleed under at all!  I recommend it.  

32A1BD71-D88F-44B3-9588-C830626D21FB_1_201_a0C8CD32F-67EC-4104-94B5-EAEB69117646_1_201_a3D00D2BF-7183-4FC3-A29A-32CCAFB80AD6_1_201_a181B9D01-826C-407C-93CD-598B94513641_1_201_aA03DAF0B-C432-4F3F-819C-6897621A130C_1_201_a

Getting near the end!

50D58095-E513-4D96-BF41-35FE7A8D40AD_1_201_aB59B30AE-136C-4080-A605-6CA7DF20686F_1_201_a9C7F3262-77F3-45A0-82D9-D49552B7DBD6_1_201_a

I had to make a few grab irons, I bought stock rod from Jeff Kane of The Train Tender.  He is great to work with and really seems to know about all the parts he has.  I order from him regularly.

A666D815-FFE2-44E3-8E67-E48376C06BE4_1_201_a

Finished train.  I decided to leave the grill unpainted, since they weren't painted on the real trains.  After all this was not intended to be a true restoration, just close.  

F3F67C8F-D57E-4034-91C7-D6A32D322880_1_201_a85AACB1C-0C67-44F9-90E5-13AC7FE275AA_1_201_a

I had to clean and rebuild the whistle and get a relay for it since it was missing.  The whistle works great even after 60 years!  The pre war whistles are all metal including the box and it is riveted together, so thankfully I did not have to take it apart.  I just cleaned the brushes, oiled it and resoldered some wires.

So that's it, was hoping for a video but while engine runs on my test track, it doesn't run well on my CC!  Guess I better clean the track.  

It took me about a year to complete this due to over thinking and procrastination plus other 'jobs' but I am happy with the result.  I forgot to mention that this engine did not have an E unit, so it only runs forward and I left that alone.  I'm happy I got the whistle working well.  

I hope you enjoyed this, if I can do it, so can you.  Make sure you are comfortable with your air brush, it makes all the difference.  You will spend more time cleaning the air brush than actually painting, get used to it!  If you have any questions I am happy to help.  

Fantastic!

All, thanks for the kind words, I appreciate it.  

The Frog tape was excellent there was absolutely no bleed through, I highly recommend it.  It is supposed to have some special stuff on the edges to protect from bleed through.  

I had to clean my CC track and now I have a short video of it running.  It takes around 15 volts to run!! That surprised me.  I just put a cord on a Lionel Type K transformer and it would provide voltage to 25V so evidently the pre war stuff did need higher voltages.



Attachments

Videos (1)
trim.6A294298-B0E2-4F32-930B-15CE12AD4DFC
Last edited by pennsydave

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×