Skip to main content

hibar posted:

Just checked Ro site does not show any in stock, also lists new catalog gons for reservation same price either way. If I am not mistaken when originally posted they mentioned quantities of 1K each? What am I missing?

Are we talking about the same products here.  I did a search for "65 mill" in the website search bar, and 18 Lionel O-Gauge 65' mill gondolas showed in the search results.  Here's one example...

Screen shot 2017-09-03 at 8.45.24 PM

Is this what you're looking for?

Attachments

Images (1)
  • Lionel UP 65-foot mill gondola

Lionel 65' Mill Gondolas  arrived this week
Three models per road name
17" in length / O-36 Curves
Extras still at Lionel - Please order Now!

BNSF

CNW

CSX

Norfolk Southern

Southern Pacific

Union Pacific

Attachments

Images (5)
  • 20170907_140307
  • 20170907_140424
  • 20170907_140557
  • 20170907_140748
  • 20170907_140908

Having perused at length the various picture archive sites before ordering one it seems that only two liveries are genuine, the remainder appear fantasy or in Atlas speak 'alternative history' liveries. IMO disappointing for a first run, my preference  would have been correct liveries for the first run including leasing liveries before embarking on non existent prototypes. I realise I am in a minority unfortunately. I ordered the CSX variant.  Probably my last US prototype purchase in RTR. 

I believe the NS cars are accurate also, the latest Lionel catalog lists another run of these cars in new paint schemes at least one or 2 may be correct have not had a chance to check yet, looking forward to your pics and evaluation of these cars from a 2 rail point of view please show ends and underbody. I have not seen the car yet so I am holding off buying recent Lionels have had  very bland underbody detail [ I realize this is not a big issue to most buyers ] still we are talking 80.00 a car list. just saying

 

Just a few points to bring up, Lionel used the Greenbriar  66' modern gondola as their prototype, it is a 17 rib side with a drop profile between the trucks obviously there are a limited number of RRs that bought from this mfg vs other mfgs of similar 66' gons [the CNW has 19 ribs] the vol 2 catalog shows the BNSF in black as the only accurate paint scheme for this car, the first run of BNSF red is a straight bottom edge gon as are all the other 2nd run cars. just saying !

Last edited by hibar

Hibar,

Thanks for the clarification. Now that I think about the discussions I read on these forums, since Lionel announced these new models, I remember the disagreement between hobbyists was not just about the paint scheme but if the railroads had a Greenbrier gondola in the paint scheme as depicted, in the catalogs. Trinity Industries & National Steel Car also make mill gondolas that look identical at first glance, but have minor differences, the longer one stares at them. I knew the CSX version was correct as Greenbrier has the (CS)XT version, number (49)1600, on their webpage for this gondola & Ryan (from Lionel) had also confirmed that these models would be based on the Greenbrier design.

So, here are some photos of my CSX version. The pipe-like details on the underside are cast as ribs, not as separately applied pipes, but they are not in view, unless one turns the car over. I also like that the “BUILT BY LIONEL” markings are getting smaller compared to their scale cars from earlier this decade.

I intend to convert these to 2-rail eventually. I haven’t decided if I am going to use the Lionel 2-rail conversion kits or Atlas-O trucks, at this time. But does anyone know if the 2-rail conversion kits that Lionel announced, are available now?

These are just my opinion,

Thanks,

Naveen

IMG_0033IMG_0035IMG_0043IMG_0046IMG_0047IMG_0048IMG_0049IMG_0050

Attachments

Images (8)
  • IMG_0033
  • IMG_0035
  • IMG_0043
  • IMG_0046
  • IMG_0047
  • IMG_0048
  • IMG_0049
  • IMG_0050

The underside is not that bad looking, if you can get the newer Atlas 100T RB trucks with the thinner side frames that would be the way to go. I do not believe Lionel has made their conversion kit available yet, with cut levers, air hoses and KDs the car should dress up well. I see these cars frequently on the CSX river line in N Jersey.

Thanks for the pictures Naveen, although I ordered a CSX one it is being delivered to my friend in IL, shipping and duty makes transatlantic purchases here a non starter and I will not actually get the car till the next March Meet. I will be replacing brake cylinders etc on mine when I get it along with the trucks. Not a bad car for the price, mine was ordered from Charles Ro. Only the UP and CSX seem to be prototypical, I could not find a matching numbers series on the prototype picture sites, I accept that  this is not a guarantee of fidelity though. I you want to model 2r f/s modern US then unfortunately one has to compromise as the majority of offerings are directed at the 3rail toy train market. 

hibar posted:

The underside is not that bad looking, if you can get the newer Atlas 100T RB trucks with the thinner side frames that would be the way to go. I do not believe Lionel has made their conversion kit available yet, with cut levers, air hoses and KDs the car should dress up well. I see these cars frequently on the CSX river line in N Jersey.

Hibar,

Stopped by P&D Hobby this afternoon. They had the Lionel 2-rail conversion kits in stock but they only had it for the 50-ton scale trucks & 70-ton scale trucks. As the prototype Greenbrier cars, that these new gondolas are modeled after, is rated for a Gross Rail Load of 286,000 lbs., is there a Lionel kit for the 100-ton trucks to be released or already available? It is my opinion that the 70-ton scale conversion kits, are wrong for this modern gondola.

Anyway, I took the easy way & just bought the newer 100-ton Atlas-O 2-rail tucks & Kadee 740 couplers at P&D & converted the cars to 2-rail. Even though I used the shortest 2-56 screw I had that was just 3/8” long, the screw broke through the floor of the car, even though I didn’t use a drill to deepen the hole. The floor must be rather thin in this area.

These are just my opinion,

Thanks,

Naveen

IMG_0051 [1280x960)IMG_0052 [1280x960)IMG_0054 [1280x960)IMG_0055 [1280x960)IMG_0056 [1280x960)IMG_0058 [1280x960)IMG_0059 [1280x960)

Attachments

Images (7)
  • IMG_0051 (1280x960)
  • IMG_0052 (1280x960)
  • IMG_0054 (1280x960)
  • IMG_0055 (1280x960)
  • IMG_0056 (1280x960)
  • IMG_0058 (1280x960)
  • IMG_0059 (1280x960)
Last edited by naveenrajan
Engineer-Joe posted:

Does Lionel make a 100 ton conversion? I only remember reading about the 70 ton kits for the modern trucks and 50 ton for the other type.

L84463 - 2 RAIL CONVERSION KIT 70 TON LIONSCALE TRUCKS (2)

I'm thinking it wouldn't matter? just probably 33" wheels?

 

Joe,

Thanks for the clarification on the Lionel conversion kits.

I was surprised how simple the conversion was, with the Atlas-O trucks as they were a direct replacement for the Lionel trucks & I used the screws that came with the Atlas-O truck to attach the trucks to the car.

These are just my opinion,

Thanks,

Naveen

Engineer-Joe posted:

Does Lionel make a 100 ton conversion? I only remember reading about the 70 ton kits for the modern trucks and 50 ton for the other type.

L84463 - 2 RAIL CONVERSION KIT 70 TON LIONSCALE TRUCKS (2)

I'm thinking it wouldn't matter? just probably 33" wheels?

 

The three primary differences would be wheel size, wheelbase, and spring number and placement.  36" vs. 33" wheels, 70" vs. 68" wheelbase, 9 spring positions per side (3 x 3 grid) vs. 7 (2/3/2) or 9 (3 x 3).  So depending on how the 70 truck is executed with respect to the springs, the difference could be significant.  The wheelbase and wheel diameter would likely be the type of thing that would need to be seen next to a proper size truck to discern the difference.  So it probably largely depends on individual modeler attitude.

Last edited by big train
base11 posted:
HMS2035 posted:

Sorry, that button coupler kills it for me.

Hal

Me too.  The new button coupler is a NO GO for me also.

I hear you on that one. It's was told that it's the same couplers as the Lion Scale Modern Boxcars.

I was told by Dave O. a few pages back that those couplers can be changed out with the scale ones with the hidden uncoupling plate. Just need to know what the part # is to buy and replace.

I had to use Micro-Mark Kadee spacers to lower the couplers on these cars that I had converted to 2-rail as the couplers seemed a bit higher, when tested with the Kadee Height Gauge. I speculate that Lionel designed this model to be converted with their own 70-ton wheelset / kit, as the 33” wheels would have lowered the car sufficiently to not need a single 0.025” thick spacer that I had to use with my Atlas-O 100-ton trucks.

Also, using the spacer, also reduces the length of the screws (securing the Kadee coupler-box to the body of the car) that intrudes into the floor of the car but doesn’t completely prevent it. The screws that were shipped loose, with these cars, were slightly longer than 3/8” & that wouldn’t have solved this issue either.

These are just my opinion,

Thanks,

Naveen

IMG_0062 [1280x960)

Attachments

Images (1)
  • IMG_0062 (1280x960)

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×