Skip to main content

I use a Lionel SC2 with Gargraves DZ1000 switches. One of the six switches being operated with the SC2  and Legacy remote has a problem. Whenever I set said switch to the "switch" position it immediately goes to the "switch" position but the begins to slowly creep back towards the straight position.  This causes train to go straight instead of switch tracks as desired.  I have checked the wiring on the SC2, the DZ_1000 and it's related switch . Wiring is good. I'm wondering if this is a failure of the SC2 or what? Thanks, fellas.

Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×