Skip to main content

Ups just brought some of the new Lionel 6-27082 4 bay ACF Hopper cars in the GT road name. The body of this car is Aluminum built on a plastic frame with molded in details on the underside. The trim seems to be plastic with operating top manhole covers. The discharge hoppers are non working. The bearing caps do rotate. The uncouple feature is by a small flat plate trigger mounted under the car between the trucks. That looks a lot better than the round head device we have seen on Lionel cars in the past.

 

In contrast to the new Lionel Autoracks that feel so light for the size, these Hoppers seem to feel heavier than I had expected. I think they are a very nice addition to my Grain car fleet. I am going to run them for awhile and then decide if I will add a few more cars BUT I DO like these cars.

 

Hope that Lionel will consider more of these 4 bay hoppers in the following road names:

Could use more of the Aluminum 4 Bay Grain Hoppers

 CN

 GT

 CP RAIL

 Alberta

 Saskatchewan ( Green w/flower)

 Ontario Northland

 ATSF

 

 Please show some of your favorite hopper cars.

 

 

 

IMG_9573 [2)

IMG_9574 [2)

IMG_9575

IMG_9576 [2)

IMG_9578 [2)

IMG_9579 [2)

IMG_9580 [2)

IMG_9581 [2)

IMG_9585 [2)

IMG_9574

Attachments

Images (10)
  • IMG_9573 (2)
  • IMG_9574 (2)
  • IMG_9575
  • IMG_9576 (2)
  • IMG_9578 (2)
  • IMG_9579 (2)
  • IMG_9580 (2)
  • IMG_9581 (2)
  • IMG_9585 (2)
  • IMG_9574
Original Post

Replies sorted oldest to newest

That is not what was shown in the Lionel 2012 catalogs.

 

It looks like the Lionel changed the extruded aluminum ACF Center Flow 3-Bay Covered Hoppers from the 1965-1972 version to the Post-1972 version, which means they could have made a correction to make the GTW a 3-bay and the G.N. a 4-Bay.

 

Now they can make the Chicago & North Western and Soo Line ACF Center Flow 3-bay Covered Hoppers with the correct details.

 

Why did no one at Lionel know about the changes made to the ACF Center Flow 3-Bay Covered Hopper and make a big announcement????

 

Andrew

Hope that Lionel will consider more of these 4 bay hoppers in the following road names:

Could use more of the Aluminum 4 Bay Grain Hoppers

 CN

 

 CP RAIL

 Alberta

 Saskatchewan ( Green w/flower)

 Ontario Northland

 

Those Canadian Railroads used Cylindrical 4-Bay Hoppers built by Marine Industries, Hawker-Siddeley, and National Steel Car, quite a bit different than the ACF Center Flow 4-Bay Hopper.

 

There are copywrite and trademark issues for the Saskatchewan Green Repaint covered hoppers. They would have to be exact replicas and Lionel would have to pay the guys at North American Railcar Corporation.

http://www.northamericanrailca...ion.com/products.htm

 

Andrew

 

http://www.trainlife.com/magaz...ovember-1994-page-35

http://www.trainlife.com/artic...flow-covered-hoppers

 

ACF Center Flow 4-Bay Covered Hoppers with a 5250 Cubic Foot Capacity.

 

They could make Santa Fe ATSF with the Gray Body and Black & White graphics.

 

Railroad names to make for this ACF 4-Bay 5250 Cu. Ft. 

Elgin, Joliet & Eastern

Kansas City Southern

SCL/Family Lines System

 

some of the other operators:

ADM

Chemplex Plastics

Dry Branch Kaolin

Goodyear

B.F. Goodrich

 

 

Andrew

 

Originally Posted by Swafford:

 

Good Evening Bill,

 

I have the Lionel BNSF and KCS Aluminum ACF 3-Bay Hoppers. I think the Lionel Aluminum Hoppers are some of the best offered in O Scale. All the railroads you mentioned would be fantastic in 3-Car or 5-Car sets!

 

I'm ready to buy when they supply!

 

Regards,

Frank

Hi Frank, I do like all styles of the hopper cars but I think I like the 4 bay best. I have some 2 and 3 bay hoppers. Most of mine are MTH but some are lionel. I do like the series that Lionel is running in the 4 bay. They have a very nice clean line look to them.

Originally Posted by leavingtracks:

These look very much like the aluminum hoppers bodied hoppers that K-Line produced years ago....???  Very nice Bill!

 

Alan

Alan those silver ATSF Hoppers are my K-Line 4 bay hoppers. I really thinl K-Line did a great job with forwaed thinking products. The only draw back is that the paint job on these units is quite delicate and needs to be handeled with CARE.

 


 

IMG_7477

IMG_7478

Attachments

Images (2)
  • IMG_7477
  • IMG_7478

 I don't have any pics to add yet. My cars match what's already posted exept I have the D&H also. These Lionel cars are some of my favorites. I would like to thank them for raising the bar on freight cars with good details and yet sturdy construction. These hoppers, TT tank cars, mech reefers, and now the autocarriers are very nice. So I'm excited to see what car is next.

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×