Skip to main content

Replies sorted oldest to newest

Kitbasher posted:

I have seen many beautiful truss bridges of all kinds in this forum.  Purchasing one, or a kit for one, seems to start at about $200 and go up from there.  I'm not afraid of scratch building one but would that still cost as much?  Any ideas would be appreciated.

I don't know where you live but the train store in downtown Lancaster, PA has a bunch of larger truss bridges on sale. I bought one originally designed for G scale operation and but a double line over it. It is about 30's long. Price - $60.00. Mine is made of aluminum and sits on my layout unpainted. 

rthomps posted:

I have both the TWTrainWorks and the Menards truss bridges on my layout.  Both excellent.  Both recommended.  

Join the bridges together (as suggested above) and make your truss "bridge" as long as you want.

Good luck.

Do you have pictures of the TWTrainworx on your layout or built?  Was it difficult to build?  The video makes their bridges look fairly uncomplicated.  Thanks!

Last edited by roll_the_dice
roll_the_dice posted:
rthomps posted:

I have both the TWTrainWorks and the Menards truss bridges on my layout.  Both excellent.  Both recommended.  

Join the bridges together (as suggested above) and make your truss "bridge" as long as you want.

Good luck.

Do you have pictures of the TWTrainworx on your layout or built?  Was it difficult to build?  The video makes their bridges look fairly uncomplicated.  Thanks!

Yes.  They are relatively easy to build.  You can make their bridges as simple or as complicated as you like.  This one is on my in-progress layout build (hence construction equipment all around).  I really like their products.  DSCN1719

Attachments

Images (1)
  • DSCN1719
rthomps posted:
roll_the_dice posted:
rthomps posted:

I have both the TWTrainWorks and the Menards truss bridges on my layout.  Both excellent.  Both recommended.  

Join the bridges together (as suggested above) and make your truss "bridge" as long as you want.

Good luck.

Do you have pictures of the TWTrainworx on your layout or built?  Was it difficult to build?  The video makes their bridges look fairly uncomplicated.  Thanks!

Yes.  They are relatively easy to build.  You can make their bridges as simple or as complicated as you like.  This one is on my in-progress layout build (hence construction equipment all around).  I really like their products.  

Thank you sir!  I put the TWTrainworx Truss bridge on my birthday wishlist to my wife...so if I don't get it for my Bday, then I will still get it. 

If you car to mess around a bit and are not squeamish, you could go with the Plastruct Truss bridge kit. They're not know for their kits being a pile of uncut shapes and some rudimentary instructions. That being said, they build a pretty nice and strong bridge with good representation of the real thing. I didn't use the bridge as a through truss since I had curves in the approaches, so I turned them upside down and used them as deck trusses. Since deck trusses are much narrower, I had enough material left over from two kits to produce and entire 3rd deck plate bridge and trussed pier supporting it. I did it "model airplane style" by pinning the pieces onto plans that I had redrawn in CorelDraw to 1:48. The Plastruct instructions are not in O'scale.

Instead of embossing rivets into the gusset plates I used rivet decals which worked pretty well. I would recommend it for those who don't want to mess with embossing.

Bridges 1 & 2

Bridge shoes are from Kiel Line and the deck railings are from Bowser.

Bridges 1

Track on bridges is special Ross bridge rail which has the guard rails already installed. Side walkways were constructed of balsa wood planks. I wouldn't do it this way again since it's quite fragile. I'd go with basswood (coffee stirrers?). As in some prototype practices, bridge shoes are only on one end.

Bridges Complete 1

They've been in operation now for 3 years are working great. I've had no trouble with them at all. Building this first Plastruct kit gave me the confidence to build other trussed structures including the material handling equipment on the distillery and Plastruct's refinery kit, which was soooo much harder than the bridges. I would not have wanted to tackle the refinery first.

Attachments

Images (3)
  • Bridges 1 & 2
  • Bridges 1
  • Bridges Complete 1

I started this message topic and it has now come full circle. This forum got me in touch with Joe Mezyk when I was looking for a truss bridge for my layout.  Joe offered an Atlas #7920 Pratt Truss bridge to me and I bought it from him.  I promised I would post photos when I was done with it.  I spent weeks practicing different weathering techniques in preparation for the project.  I just finished it and I like how it turned out.   Thanks Joe!  And thanks to Rattler21 for introducing me to Joe. 

IMG_8980IMG_8981IMG_8986IMG_8990

Attachments

Images (4)
  • IMG_8980
  • IMG_8981
  • IMG_8986
  • IMG_8990
Last edited by Kitbasher

The weathering was many steps. 

  1. Rattle can spray silver
  2. Airbrush darker gray in random areas
  3. Dull Coat everything
  4. AK Heavy Chipping fluid on largest trusses (after spraying a rust color first)
  5. Vellejo Light Rust Wash over everything
  6. With a natural sponge and heavy body acrylic, dab on rust on various colors
  7. Create rust streaks using oil paint and a fan brush to swipe down
  8. Bragdon Soot and Grimy Gray colored weathering powders
  9. Assemble

Simple as that!

Paul

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×