Skip to main content

Up until now all I've had steam wise has been my old postwar engines. But now I'm looking for something with a little more detail to it. 

I have found some MTH 4-6-0 steam engines with protosound 1.0 for sale on eBay. Are these worth the trouble(I read the other day about battery and board problems)? Or should I look for something else? I'll take suggestions for my first step into "new" steam models.

Original Post

Replies sorted oldest to newest

Out of all the steam engines I have (Lionel, MTH, Sunset 3 Rail) I am finding that I get the most satisfaction running and watching my Lionel Legacy engines. They are not cheap but they have held up beautifully in the "fully satisfied" department. In fact I now won't look at an engine if it's not a Legacy engine.

But this is just IMO.

happy training!

JohnJr

Any of the various MTH steam engines are just fine,  I own many,  both PS1 and more current PS2/3 steam.    To me it is a given up front you want to make sure any engine you buy is in what condition, running condition or not.   Putting in a new battery (I would use a BCR battery replacement) is also a given.

That said,  buy what road name,  engine / wheel configuration you prefer.   These days, secondary market are quite low relative to issue pricing so I suggest buying the latest technology if MTH is the way you go.   The run great either in standard transformer control or in command mode.

Mark

 

Best new steamer deal out there: Lionel's LionChief 4-6-0 Camelback. It's actually a scale model, properly detailed, it's small and can take small curves, has sound and cruise, drop-dead-easy command control (if you choose to use it), and a price that is right in there with some used MTH PS1 steam.

Also, it's a Camelback - distinctive and "exotic".

I would recommend the  MTH "Imperial line" of Steamers if looking for more detail than the postwar engines.

Go for PS2-3volt or PS3 as mentioned. Imperial line is not scale like Premier but cost is reasonable and looks great on small radius curves.

Are you looking to Model the White Pass? My brother has an amazing G scale WP&Y collection.

 

Tom M,

   The guys are giving you some real good advise, I especially like the Camel Back  idea for it's detail, got one better however, the Legacy Shay is a seriously detailed Engine and is just a fantastic engine to watch run, sounds great and pulls lots of rolling stock.  

Patrick's Trains in WVa might have one left in stock and he gave me a great price on mine a while back.  IMO the Legacy Shay Steam Engine, is the best detailed engine for the price on the market today.

PCRR/Dave

Last edited by Pine Creek Railroad

Tom M, there's some nice info here already, but to help a bit more, what are you looking for when you say 'detailed'  and what sort of price range are you working in?  There are some fantastically detailed models out there if what you are looking for is something as close to a perfect scale model as possible, but they tend to cost, for the most part.  

On the other hand if what you mean is you are looking for something more realistic than post-war stuff, but not necessarily prototypical scale models, the field opens up for many locomotives made in the last 20 years, many of which can be had rather inexpensively.  

I dove in last year and purchased a circa 1999 MTH premier Berk with ps1 that I got a great price on.  Made sure the seller had tested and I put in a brand new battery just to make sure. Haven't had any issues and love that thing. It's going to be upgraded as it's too beautiful for the shelf and I'm running mostly command now. The hours of enjoyment my son and I have had with that thing are priceless, and I didn't worry quite the same way with him at the throttle as I would've with a 1200+ engine. 

Thanks for the insight everybody. I'm looking for one under $350. I found a MTH 4-6-0 with protosound 2.0 I'm thinking about. Merry Christmas to me. My dream engine/set is the NYC Water Level Freight set. Ever since I watched Eric Siegel's review I've wanted one real bad. Maybe once tax returns roll around...

Just throwing it out there, there are a number of 'like new' lionel and mth mohawk 4-8-2 engines on the big auction site at the moment in the $350-450 range if your heart is set on that type.  The lionel ones all appear to be conventional models with chuffing sound.  Not sure what the quality is on these, but they look nice.  You might also find one posting a 'looking for' ad here on the forum.

 I'm particularly partial to the hudson Jr's from the early 2000's if you're looking for a fairly good looking engine that will slip right through O27 curves and pull a small mountain.  They tend to go for $200-$350 with tmcc and railsounds in my experience.  

Last edited by JohnGaltLine

Lee Fritz (and others) ...Williams trains can always be found online and from hobby shops in OGR and other magazines for about half the listed Williams retail.  The new 4-6-2 (awesome!) lists for $599, but can be found for $350....got mine from Mario's Trains.   Their 4-6-0, 4-8-4, and semi-scale hudson can also be found at the $220-$300 range newsroom retailers.....

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×