Skip to main content

Runnning Legacy Cab2 system, the Super Bass B-unit in my Santa Fe ABBA consist lost its sound control commands. The "prime mover" revs up to maximum rpm when powered up, no bell or horn. This behavior started suddenly; the unit worked and sounded great since out of its box. I have attempted to re-program the unit, but no luck. Anybody else have this issue...recommendations?

Original Post

Replies sorted oldest to newest

VegasTrains posted:

Runnning Legacy Cab2 system, the Super Bass B-unit in my Santa Fe ABBA consist lost its sound control commands. The "prime mover" revs up to maximum rpm when powered up, no bell or horn. This behavior started suddenly; the unit worked and sounded great since out of its box. I have attempted to re-program the unit, but no luck. Anybody else have this issue...recommendations?

Interesting.  I had this same issue with my Powered A unit.  I opened it up and reseated the connections and all has been fine since.  It's like the RS are seeing track voltage rather than the input from the CAB2.  It did seem to respond to movement commands though.

I'm keeping a close eye on mine for further incidences. 

Last edited by MartyE

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×