Skip to main content

Not sure if this is the correct place for my inquiry.  redirect me to correct site if needed.

I wanted to create a simple CTC panel on heavy aluminum or masonite backing, and read people having overlay made/printed commercially.  Was this done by a sign company, or is there an OGR sponsor or a private party here who can do this start to finish from a sketch?

Suggestions?

Original Post

Replies sorted oldest to newest

If you Google "model railroad CTC products" you will find these guys, who make CTC machines.

http://ctcparts.com/

If you mean that you want a track diagram created on a panel, then any sign-making company (or a graphic designer, or a teenaged computer geek) can create one using diagram software.

The second one is one I was wanting.  Will call around here to see whats what.

Thanks

I used standard 8-1/2x11 paper in my home Epson printer. I have access to a sheet laminator, so laminated them. I then attached it to pegboard. The yard one was sized to fit for just the 8-1/2x11. The main panel, I used white contact paper to cover the rest were the switch and accessory controls are. As I was drawing, I made sure the switch and track locations would be over holes in the pegboard for easy placement of switches and indicators.

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×