Skip to main content

Hi, not sure if i am doing this right - first time on here but here goes.  Upacked my train from some 50 years ago and am setting it up for my grand kids.  Found a Marx No. 418 Bell Ringing Crossing Signal but the internal wires are removed.  How can I locate a diagram showing how the internal wires should be connected to go to the track?    Any help is appreciated and if i posted this to the wrong area please let me know.

Thank and be safe out there.

Kirk

Attachments

Images (1)
  • 60748397102__18D2C00D-1765-4122-96D2-F9AA08A543FB (002)
Original Post

Replies sorted oldest to newest

I don’t have a diagram, but found one I have downstairs. There should be one wire coming out of the bottom. That is wound around the binding post under the base that has the insulating spacer between the base and post.788B406F-559E-4822-BC28-DC01AB6B9B77CB070E64-5C5A-4C3B-BF86-FA9FEAC0E532The other post is the ground circuit through the base. Hope this helps.

 

Attachments

Images (2)
  • 788B406F-559E-4822-BC28-DC01AB6B9B77
  • CB070E64-5C5A-4C3B-BF86-FA9FEAC0E532
Last edited by Ross

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×