Skip to main content

Replies sorted oldest to newest

I use either Menards fastrack to tubular adapters, or the lionel fastrack to tubular 5 inch piece (6-12040)

, then I use the Atlas to tubular rail joiner adapter pins. On a more permanent layout, I cut down the Menards tubular to fastrack piece to 1 3/8 inch long (same as that short piece on 072 fastrack switches).

The reason- geometry. Fastrack is not square or the rails do not end at 90 or equal length.

So thus, you need some adapter track that mates with the fastrack but can either be cut or ends with a straight edge and then also is compatible with the Atlas tubular rail joiners.

The Menards piece

Display Main Product Image 2

+ Atlas 6095 Tubular style joiners


Images (3)
  • mceclip0
  • mceclip1
  • mceclip2
Last edited by Vernon Barry

Add Reply

This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)

Link copied to your clipboard.