Skip to main content

I searched the Forum for posts indicating how folks are liking their Menards tubular track, since it will have been on the market for two years as of next month.  There were initial reports of some loose pin connections, but I would be interested in hearing from anyone who has put it through significant use during that time.... possibly even having built their layout with it.   Thanks! 

Original Post

Replies sorted oldest to newest

This may not be what you were looking for, but I have an O72 carpet loop with 5 straights each side; down for 7 months.  The pins are pretty loose on a lot of the sections.  So much so that I bought the “tinmans” track pliers.  Which of course solved the problem.  I also had a dead short in a section due to the crimp machine  pressing through the insulating paper.  So had to check continuity on all sections.  Should be normal practice anyway, I just didn’t know any better.  All the sections had a machinery processing film on it, that I just cleaned off with alcohol. Seems heavy compared to FasTrak, but I have no other comparison. Once down however, I have had no problems with it.  Hope this helps.

75BB9400-0D54-419C-B88D-E2136C3057E5

8A9A5C36-0956-4565-90C0-47DDC78D3759

918703CA-3A43-45B5-B6C9-EE6B0FA31680

C25CFE51-6B2F-437D-B7D5-7635AE2F2E12

 

Attachments

Images (4)
  • 75BB9400-0D54-419C-B88D-E2136C3057E5
  • 8A9A5C36-0956-4565-90C0-47DDC78D3759
  • 918703CA-3A43-45B5-B6C9-EE6B0FA31680
  • C25CFE51-6B2F-437D-B7D5-7635AE2F2E12

I bought a loop of 096 curves from Menards awhile ago and plan on using it on my layout, but not after re crimping all of the pins and wiping all of the track down with either goo gone or alcohol. The track fits extremely loose together due too the pins I feel being way too small. And after removing the packaging, the rails are covered in machining oil and will need a good wipe down. Honestly if I didn't already have so much invested in tubular track and switches, I would have taken another route. 

 

John-

I bought some of the 096 curves and extra long straights last year due to the attractive price. Ties and pins were loose. Track was coated with machining oil. Nearly every other section had a short. Several sections were not in gauge. Rather than mess with it further,It all went into the recycle bin. You get what you pay for. 

Adriatic posted:

I bought an 0-36 circle & it's perfect.  Tight pins, no shorts, film, no oil.  I can pick it up & roll down the hall if I want.  Magnetraction works on it, lock ons fit, it's strong; like Lionel O give or take a few thousandths.

Thanks you Adriatic & all who relpied.   It was great to hear everyone's experience.  Too bad that a track tightening tool sounds to be necessary to get this stuff in operating shape.  It kinda spoils the "good deal" on pricing.  But then, Adriatic observed no such problems.  The oily coating is something I hadn't heard about either.  I Menards  doesn't want it rusting during transit/storage?

jim sutter posted:

RADIORON, seeing it in person would be the best way to answer your questions.   If I had a store near me, I would gladly take the time and examine if fully.

 

Jim... you are correct.... partly.  Seeing the track is ok... but hearing directly from the guys who bought & have used it is even better.  If I were just looking at the track, I might be very tempted, but hearing the negative stories from just these 6-7 guys is enough to change one's mind.

The solution sounds pretty simple to me. If you have any reservations about the quality of Menards track, or other products, then don't buy it. I've bought some Menards track for a layout I have planned for this winter. I guess I'll find out then the quality of what I've purchased from them. I only live ten minutes from my Menards, picked up what I ordered from the store. I buy a lot of stuff year around from them, not just train stuff. The materials to build my layout will be purchased from them as well.

I tried to buy Lionel and K-Line O Gauge Track from sellers on ebay many times, but, could never get any of it bought for what I thought was a decent price, or the shipping was in my opinion, outrageous. So, I decided to buy my track from Menards, I'll find out then if there are any issues with it. Also, from reading Menards threads here on the forum, I feel that Menards costumer service tries to resolve any and all issues of quality with their products.

Rusty  


I purchased some 30" straights from Menards two years ago, in preparation for a new layout I was building.  I found the tie spacing disappointing.  The oil coating is a necessary evil and didn't bother me, and was easily wiped off.  The galvanized coating is rough, in my opinion.  Cutting the pieces to make custom lengths, which are inevitable, takes much care and a jig is highly recommended.  

I would only use this track on sidings for train storage.  I wound up selling two cases of straights and the buyer was not happy with it either, so I refunded his money.  Sometimes a bargain is not a bargain.  Since then I have been buying Lionel and K-Line tubular track from Ebay sellers.  As for the cost of shipping, I look for listings with reasonable shipping costs.

Will not be buying any More Menards track do to the loose pins issue. Even with a track pliers I cannot tighten track ends. Apparently the metal thickness is off.

For what it's worth I visited my local Menards over the weekend and they now have a full track display of all curve sizes and 30" straits. These tracks do fit together tightly. So maybe they have addressed the problem.

areizman posted:

Will not be buying any More Menards track do to the loose pins issue. Even with a track pliers I cannot tighten track ends. Apparently the metal thickness is off.

For what it's worth I visited my local Menards over the weekend and they now have a full track display of all curve sizes and 30" straits. These tracks do fit together tightly. So maybe they have addressed the problem.

I agree, I too was at my local Menards and did a test fit on several pcs.  they all fit very well.. Bob

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×