Are the corner leg brackets custom or are they an off the shelf part?
The 4 black parts upper right.
Original Post
Replies sorted oldest to newest
My understanding is that they are custom parts made specifically for the LCCA FasTrack modules.
LCCA's publication The Lion Roars had an article about various styles of home made corner brackets that their members have created for their own modules.
The December 2018 issue of The Lion Roars is on LCCA's website in the member's section. It had the article on various styles of home made corner brackets.
There is also at least one OGR thread on LCCA corner brackets.
If you google "fremo freemo module legs" some ideas pop up. I settled on this for my LCCA modules
based on the below image I found on the internet. I eventually eliminated the second wingnut and just put a lag bolt in that wasn't tightened all the way down. The principal of this is to have the two pieces to the side of the leg be about 1/8" shorter than the thickness of the leg so it clamps it in place. In use, you only have to loosen the one side a bit to remove/insert the leg.
Brendan
Attachments
Images (2)
Thanks everyone for the replies. I'll check out the article, the OGR thread, and the Google search.
