Skip to main content

I have been replacing batteries in a collection of MTH locomotives.  I came across this particular PS2 engine that also has a damaged tether.  It is, as presented on the locomotive, a 4 pin tether that connects the powered A to the Dummy B for lights and couplers.  When I go to the MTH parts site and enter the product number, which was really easy and fast,  it shows is 10 pin tethers, which I assume is for a full blown slave board configuration.

Now I can source the tether locally but due to the possible error on the parts page  we are having an issue getting the correct number to get the correct tether.  Any help would be appreciated.

Photo Oct 24, 3 55 50 PM

Attachments

Images (1)
  • Photo Oct 24, 3 55 50 PM
Original Post

Replies sorted oldest to newest

I just searched "Tether" on the new MTH parts site and I believe I need

BC0000074    PCB / TETHER CONNECTOR / 4-POSITION / 225mm L / DIESEL TRUCK MOUNT

which isn't shown due to being out of stock.

I'll pass this info along to my parts guy and see if he has it.  If anyone knows if it is a different part I'd appreciate any updates.

Last edited by MartyE

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×