Skip to main content

Went to test my ESE Hudson today on my Lionel LW transformer.  When power is applied the electro-coupler opens and almost acts like it has a short, any ideas?  It starts to get hot if I leave power applied.  Short video attached.  I’ve never run much Protosound stuff, so I’m learning as I go.

I thought about disconnecting, but it appears to be soldered to the board (no disconnect)


Videos (1)
Original Post

Replies sorted oldest to newest

Add Reply

This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)

Link copied to your clipboard.