Skip to main content

I turned on clicky clack using the app on two individual engines.  Those engines are now in a lashup running.  After about 30 seconds of inactivity, the engine sounds fade away and the Clickity Clack comes on.  Horn and Bell no longer sound.  The only way to get Engine sound and horn/bell back are to adjust the speed.  Then Clickety Clack goes away and Engine Sounds come back.  The process repeats again after about 30 seconds of inactivity.

Is this normal?

Ron

Original Post

clickity clack that's the way it normally works after 30 seconds it engages unless you default clickity to off. also speed determines when and if clickity shuts off again! when you start to run engine and engage clickity comes on but only if speed is greater then 24 mph if i remember! when you slow engine down clickity will shut off when under 24 mph and you have to wait 30 seconds each time it is turned off or on! when clickity  when you again sped up over 25 or 26 then clickity clack will turn on again. while clickity clack is engaged all other engines sounds are cut off that is always normal ! engine sounds come back on when after 30 seconds after speed is back to below 24 mph!

 

Add Reply

Post
The DCS Forum is sponsored by
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×