I notice that in a discussion about "O"-gauge drawbars, the Part number "FB-0000020" was listed.  Isn't that an HO drawbar?  I am confused..

 

Thanks for any help!

 

Pat

Original Post

I am trying to find out if the FB-0000020 part number for PS3 is the same part for HO as well as O steamers.  if not, what is the correct part number for an HO drawbar?

Thanks!

Pat

Okay, I am looking for a ps-3 6 pin drawbar myself.  Its from a 263E tinplate loco.  I am not sure how they are measuring these.

20200302_083440[1]

end to end its 65 mm.  Doe a replacement come with the little horizontal tension spring?  Also although I don't have a picture, are the little plastic insulators that protect the connections were the drawbar mounts to the loco included in a replacement kit?

Obviously I haven't bought one of these before.


All info appreciated.  JHZ563

May God Bless us all.

Attachments

Photos (1)

Center hole to center hole, and usually, if you remove cover the length is listed in mm.  G

MTH Authorized Service Center

Authorized ERR Dealer

Lionel Independent Repair Tech

Virginia Train Collectors Member

Thanks guys. Pin to pin measurement is 45 mm.  I didn't realize it had a cover.  Its clearly marked underneath. 

Now I can order up a replacement with confidence- thank you 

15831643018341820375399016407703

May God Bless us all.

Attachments

Photos (1)

Add Reply

Post
This forum is sponsored by MTH Electric Trains
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×