Skip to main content

My buddy Roy picked up what looks like one of those MTH engineering came to him with no motor, motor mount, flywheel, or coupling....Roy tasked me with making it all happen as none of the parts for this set up are available anymore,....after figuring out what would fit, we decided on a 12V 8000 series Pittman,.....we found some 8000 motors, that needed the end housing machined off, and got to work,....first thing was to ditch the CPR driver housing, and machine it down to just a round cap, we fitted a Lionel mount that worked well with this application, with little mod work other than some bends in a brake,....i machined Roy a nice flywheel and coupler and and a short dog bone to complete the transmission,...everything fits in the shell, and works very well,...



Images (9)
  • 0356F1BA-7CA4-4883-B71B-638F90ACF1BC
  • A3252DFD-D483-4715-9428-0D09CE3F2685
  • F7232920-C70E-459D-A560-BA57F2F929A5
  • 18C86F36-F7B7-4C01-80C1-E753F5D7A37D
  • ECF528DF-B3A9-4B41-85B1-9D630431B61B
  • E186127B-8DD3-42B6-A685-5D5D3D240E76
  • 4B1DF6B8-5432-4B82-AE65-506D65AF9A77
  • E51B35F7-E07B-409A-9E07-5101F0BA3C66
  • A7B22B2C-213D-4CB1-B6D3-52C9D8C0198F
Original Post

Replies sorted oldest to newest

Add Reply

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
Link copied to your clipboard.