Skip to main content

Replies sorted oldest to newest

Turn the car over, look at  the coupler mechanism.  If it has a spring running lengthwise, the spring tension is not  enough to keep the coupler closed.  You can most probably open the coupler by pulling on the end of the coupler.  If so, replace that spring with a stronger spring, or elongate the installed spring, cut the excess off the spring and reinstall.  You can get different springs at either Ramsey or Ace Hardware stores.

Bruce

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×