Skip to main content

Replies sorted oldest to newest

Try a reset in conventional.  1 horn followed by 5 bells 1/2 second apart.  You must get a two whistle blasts, if successful.

When it’s running with no chuff, does it hunt?  Run a bit, then stop?  If so, the tach is not working properly.  Either the gap is inadequate, slipped out of the holder, a wire broke or the drawbar is not fully inserted.  Easy enough to pull the boiler shell and inspect.

Add Reply

Post
This forum is sponsored by MTH Electric Trains
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×