Skip to main content

Repairing a dead Climax (proto 2/5V) loco that got smoked due a lengthy track short.  The Motor is toast and I can get a replacement; my question it how to remove it.  There are two screws from under the frame that attach to the 90 degree gear box; the box is loose and the assy wobles but does not come out.  Has any one removed the motor from this Hill Crest Climax.  The 5V was cratered but have a replacement.  Any into is appreciated; thanks much; Falcon70

Original Post

Replies sorted oldest to newest

Add Reply

Post
This forum is sponsored by MTH Electric Trains
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×