Skip to main content

Folks,

I have a premier berk. On the bottom, in the drive train area there are a few screws I can remove to grease the loco. I have injected red and tacky. Should I remove the shell, to lube the motor gear, or should the grease I injected, be sufficient. There are so many delicate parts, I wouldn't mind minimizing the dis-assembly.

Original Post

Replies sorted oldest to newest

Did you ever notice that red & tacky has an odor? When my dad was over running engines without the smoke going he got a little sick. He kept saying he was smelling something. sure enough it was the red & tacky that resulted in his asthma flair up. It was so bad he had to leave the house.

 

I never used R&T until I decided to replace the grease in that particular engine a few days ago. Later my wife said that she smelled something different in the house for the past few days.

 

Weird but when you think of it the grease is made for outdoor equipment.

 

Last edited by Renovo PRR

Ok the incident today gave me a scare but it was sudden and at first unexplained. I did some looking and this is what I found on their MSD for Red & Tacky.

 

-

INHALATION
: Prolonged exposure to high vapor concentration of this product can cause
headache, dizziness and nausea. Short-term
overexposure can caus
e an irritation to
the respiratory passages.
 
Granted we are talking about just a little amount of this stuff so maybe it will not effect everyone but I had no clue at all it was even a little concern.

Hello guys and gals.........

 

I have very bad asthma since 1965 and still do to this day, I used Red & Tacky #2 in my 2 engines and not had any problems with breathing or irritations problems. I guess it depends how much you use the grease or opening the tube and sniffing it would surely cause it. There are some teens that would sniff spray paint as I think that would be worse.  I believe many members who use the R&T in their trains would have better sense not do that and not have any problems.  I believe there is no such a thing as 100% human safe grease.

 

the woman who loves the S.F.5011,2678

Tiffany

The MTH instructions will advise you properly about lubrication; what they say is all

you need to know. If you do not have them, I imagine that they are available online

at their website.

 

I have never seen any reference to removing the boiler on a model steam locomotive for

lubrication, regardless of brand.

 

Oil the rods and even the valve gear a bit, the axles (trucks included, unless the truck has delrin axle bearings - no need) and grease where it says "grease". That's it.

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×