Skip to main content

Hello. I have a MTH 30-1149-1and it stopped running tonight.  Ran fine a few weeks ago, Ran one loop tonight.  I replaced the battery with a BCR a few years ago.  The tender powers up and the sound is low and muffled.  Than the red light on the Z4000 comes on and the engine dies.  I took the cover off the tender and it looked like one connector of the BCR was partially on, I secured the connector and no change.  Any suggestions?  You fixed my Climax a few years ago. Thanks. Ed

Original Post

Replies sorted oldest to newest

I thought we had it.  I changed the BCR, powered up and same muffled sound and flashing red light on transformer after a few seconds.  Tried a second time and it powered up normal, let it charge for about a minute.  Normal operation, forward and reverse.  Ran a half loop, about 20 feet, stopped and transformer flashed red.  Checked connections on tender, powered up, no sound and flashing red.  Checked connections again, powered up, and nothing now.  No sounds, headlight on engine does not come on, but no light on transformer.  What next?

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×